Can I reverse the door on a kenmore 253.6580250A

Yes, it looks like you can. Don't forget though that you have to get inside and move the door switch.

https://www.google.com/search?q=Kenmore+Elite+Quietpak+4+reverse+door

..

To reverse the door on a Kenmore 700 series dryer, you can follow these general steps:

1. Gather the necessary tools: You may need a Phillips head screwdriver, a putty knife, and a small flathead screwdriver.
2. Unplug the dryer: Before starting any work, ensure the dryer is unplugged from the power source for safety.
3. Remove the hinge cover: Use a putty knife or a small flathead screwdriver to carefully pry off the hinge cover located on the opposite side of the door.
4. Remove the door: Locate the screws that secure the door to the dryer and use a Phillips head screwdriver to remove them. Carefully lift the door off the hinges and set it aside.
5. Remove the strike plate: On the opposite side of the door opening, remove the strike plate by unscrewing it.
6. Remove the door hinge: Unscrew the door hinge from the side it is currently attached to and transfer it to the other side of the opening.
7. Install the strike plate: Attach the strike plate to the opposite side of the door opening using the provided screws.
8. Reinstall the door: Place the door onto the new hinges and align it properly. Insert and tighten the screws to secure the door to the dryer.
9. Reinstall the hinge cover: Snap the hinge cover into place on the side where the door hinge used to be.
10. Test the door: Close and open the door to ensure it operates smoothly and securely.

It's important to note that specific instructions may vary depending on the exact model and design of your Kenmore 700 series dryer. Therefore, it is recommended to refer to the user manual or installation instructions provided by the manufacturer for detailed and model-specific guidance on reversing the door.

you can put in your model numder of your dryer in google an it will show u a video on how to reverse your dryer door ok

Take door off, reverse the handle and hinges to other side of door and reinstall.

The Kenmore HE4T washer does not have a reversible door. The matching dryer would have a reversible door.

Some newer washers do have a reversible door but it is still a very small number of washer that allow you to reverse the door.

You can not reverse the door on an HE4T washer.

Unfortunately it can't be done. The dryer's door can be reversed but you're stuck with the default configuration with the washer.

Sorry, dryer doors are reversible, but not washer. Please don't rate this as anything but a FixYa lowers my overall score.

nope only the dryer doors are reversable..last washer to have reverable door that i know of was old neptune

The door can be reversed on the dryer but not the washer.
To reverse the washer, the door latch and wiring harness would have to be relocated, which is not practical from a manufacturing standpoint.
Post back if you have any questions.

You can't reverse the washer door, only the dryer door.
They don't make the washers reversible because the door latch and wiring harness would have to be relocated to the other side. It just isn't practical from a manufacturing standpoint.
Sorry, Mike