Fax in memory: 06 - Brother IntelliFAX 4750 Plain Paper Laser Fax

A fax is retained in memory until printed (excluding memory limits). Given the failure to print and the continued "fax in memory" message, I suggest you try the photocopy feature of this device. If you try to copy something, it should force the printing of the fax.

The same thing can happen if you run out of paper. If the fax does not matter and you can't find instructions on how to clear fax memory, unplugging the device should clear the fax memory.

http://tech-in-check.blogspot.com/2020/06/how-to-clear-fax-memory-on-ricoh-aficio.html

and lots more here

https://www.google.com/search?q=Ricoh+im+c3000+fax+memory+full

Manuals and Support

https://www.ricoh.ca/en/products/pd/equipment/printers-and-copiers/multifunction-printers-copiers/im-c3000-color-laser-multifunction-printer

..

If you see an error message telling you that the product's fax memory is full, try these solutions:

• If you set the product to save received faxes in the product's memory or inbox, delete any faxes you have already read.
• If you set the product to save received faxes on a computer, turn on the selected computer. Once the faxes are saved on the computer, they are deleted from the product's memory.
• If you set the product to save received faxes on a memory device, connect the selected memory device containing the save fax folder to the product. Once the faxes are saved on the memory device, they are deleted from the product's memory. Note:Make sure the memory device has enough available memory and is not write protected.
  
• If the memory is full, try sending a monochrome fax using theDirect Sendfeature or sending your faxes in smaller batches.
• If the product cannot print a received fax due to a product error, such as a paper jam, the memory full error may appear. Clear any product errors, then ask the sender to resend the fax.

The Causes
Compressed image data abnormality. HDD connection trouble when HDD is installed.try to check and see wether connectors are connected properly
. Remedy
If the job at an occurrence of an error is a FAX job, check the FAX PWB. Check connection of the MFPC PWB and the HDD. Replace the MFPC PWB.

To gain extra memory, you can turn off Fax Storage OR Print fax messages in memory (See Setting Fax Storage, page 48.) OR Expand the machines memory.
Retrieve or Erase a Fax
Press 9 6
then to
Retrieve all faxes Press 2, then enter the number of remote fax machine and then press # #. After
the beep, hang up and wait.
Erase all fax messages Press 3. If the data stored in the memory has not been printed before, it will be printed first and then erased.

Setting Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax messages from another location, using Fax Forwarding or Remote Retrieval functions. The screen will indicate when you have a fax stored
in memory.
1 Press Menu, 2, 5, 2.
2 Press left arrow or right arrow to select ON (or OFF), and press Set when the screen displays your selection.
3 Press Stop/Exit.

If there are faxes in memory when you turn the Fax Storage OFF, the screen prompts you to erase any faxes in memory.
If you press 1, all fax data is erased and Fax Storage is turned OFF. If the fax data in memory has not been printed before, it will be printed first, and then erased. If you press 2, data is not erased, and Fax Storage remains ON.

It may be too late to print the faxes if your printer was unplugged. But you can try:

reprint the faxes in memory

Your HP OfficeJet can store a limited number of fax pages in its memory, with

the number of pages depending on the model you purchased. When your

HP OfficeJet runs out of memory to store faxes, it will not receive any more fax

calls until the stored faxes are printed.

Reprint Faxes in Memory enables you to reprint a fax stored in memory. For

example, if your print cartridge runs out of ink or paper becomes jammed when

printing a fax. This option prints all faxes in memory; press Cancel to stop

printing faxes you do not need.

1 Press Menu.

2 Press 2, then press 3.

This selects the Fax Functions menu, then selects the Reprint Faxes in
Memory option. The faxes are printed from memory.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Hi

Error E7-06 means Image data decode error. This appears due to Image expansion error. It has been caused due to MCU PWB abnormality or USB cable trouble
Try using a different USB cable. If this doesn't help then try the reset procedure---

Sharp ram clear -- Press function 9 * 8 # 7 then # or * until display reads memory clear, then press start. Note the other maintenance mode options displayed on the screen when pressing # or *.

Hope this helps...

Daniel

Press Menu, 2, 5, 2. The screen prompts you to choose a fax setting. Press <-- or --> to select OFF then press SET. If there are faxes in memory when you turn Fax Storage to OFF, the LCD prompts you to erase faxes in memory. If you press 1, all fax data is erased and Fax Storage is turned OFF.


You may want to enable Real Time TX so you can send fax without using memory. (Under FAX-SETUP SEND-REAL TIME TX)

You may also disable Fax Storage if you don't want to store incoming faxes in memory for remote retrieval (Under FAX- REMOTE FAX OPT-FAX STORAGE)

For effective use of the memory, you may also clear the caller IDs stored in the memory. Press MENU, 2, 0, 2 Press the arrow keys to display # then press CLEAR.


Hope this helps!

when fax gives msg ,fax in memory,just remove jammed paper .put fresh papers in tray.if the msg is coming on screen that fax in memory just press START key.there is a green button labeled as fax start .u will receive all faxes in memory.MIAN AKHLAQ .do not forget to rate the solution.

its a fax error that states there is a line problem, problem is probably static in the phone line