At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
KDL40Ex700 freezes and reboots on "extra subscription channels". Reboot is never complete, ie: can not hear the proper "click" coming from within the TV. Only way to give a proper reboot is to wait 5-10 minutes with TV off or use the hard switch on the side.
Getting bonkers, can't watch shows without having to wait for a restart of the telly every 5 minutes.
Does not happen with standard diital channels or peripherals such as PS3, PC, etc
Do a reset to this TV, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
The problem your describing can be contributed to your cable box. Depending on your cable company there are times when the box has trouble translating the signal to the tv. You tv is operating normally. Suggest to the cable company to switch your box.
This is not a light engine problem as stated above. It is an expensive repair. $650 to $1000 for the part depending on the model of your TV plus $300 for labor. The problem with blue haze is well known on all Sony LCD TV's made after 2003. The part that is defective is called the "Optical Block". I have the same problem on my TV that started yesterday. Here's the link to repair it yourself. Best advice, junk the TV and buy another. Not worth doing a $1200 repair on a unit that costs the same as a brand new one these days. http://sites.google.com/site/sonylcdrptvproblems/sonykdf-55wf655opticalblockreplacement
Hope this helps. Remember, this repair is time consuming and complex. Good Luck.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1.Make sure device is completely powered off. 2.Press and Hold The Power and volume down button at the same time. 4.Select factory data reset in recovery menu. 6.Reboot System Now and you're finished!18 Mar 2013
To uninstall the software Deep Freeze must first be disabled and then uninstalled.
To disable Deep Freeze:
1. Hold down the shift key and double-click on the Deep Freeze icon. Alternatively, you
can press Crtl-Alt-Shift-F6. You should now see a password dialog. 2. Enter your password and click OK. If you have not yet entered a password you should be
able to click OK without entering anything. You should now see a dialog with boot options. 3. Select "Boot thawed" and click OK. This will disable Deep Freeze on the next reboot. 4. Reboot your machine. After the machine reboots you are ready to uninstall Deep Freeze.
To uninstall:
1. Locate the installation file you used to install Deep Freeze to this machine. By
default the name of this file is called "DF5Std.exe" for versions 5.X and "DF6Std.exe" for
versions 6.X. 2. Run the installation file (DF5Std.exe or DF6Std.exe). 3. Select the option to "Uninstall" 4. The software should uninstall and reboot the machine. When the machine reboots, Deep
Hold the power switch for 20 seconds. Slide the power switch and hold it in place for 20 to 30 seconds before releasing it.
You need to physically hold the power switch in its off position for this long. Doing so tells your device to "reboot," in essence, instead of merely shutting down.
The reboot screen should appear as soon as you release the power switch.
Give the Kindle time to reboot. The Kindle will reboot within a minute or two. Be patient and give your device ample time to finish its reset.
There is some possibility that the Kindle will freeze as it reboots. This may be the case if your Kindle stays frozen on the reboot screen for more than ten minutes.
Charge the Kindle. If the device freezes during the reboot or does not respond to the reset at all, plug the charger in and allow your Kindle to charge for 30 minutes or more.
Make sure that your Kindle has enough time to complete a full charge.
Hold the power switch down again. After you finish charging the Kindle, slide the power switch and hold it down for another 20 seconds.
The reboot screen should appear again. Give the device a minute or two to reboot before checking it again. This should complete the reset.
I am thinking your hard drive is dead, or you have a virus that completely wiped out your PC. so try the easy thing 1st, put in the windows disk, reinstall windows
If you haven't already tried rebooting the receiver, unplug the receiver for 10 seconds (make sure all lights are out on the receiver) and plug back in. This will cause the receiver to reboot and reacquire the satellite signal. After it completes this process, it will take you back to the channel you were on. See if you are still having problems.
If this doesn't fix the problem, you may need a new receiver. I hope this helps.
To uninstall the software Deep Freeze must first be disabled and then uninstalled.
To disable Deep Freeze:
Hold down the shift key and double-click on the Deep Freeze icon. Alternatively, you can press Crtl-Alt-Shift-F6. You should now see a password dialog.
Enter your password and click OK. If you have not yet entered a password you should be able to click OK without entering anything. You should now see a dialog with boot options.
Select "Boot thawed" and click OK. This will disable Deep Freeze on the next reboot.
Reboot your machine. After the machine reboots you are ready to uninstall Deep Freeze.
To uninstall:
Locate the installation file you used to install Deep Freeze to this machine. By default the name of this file is called "DF5Std.exe" for versions 5.X and "DF6Std.exe" for versions 6.X.
Run the installation file (DF5Std.exe or DF6Std.exe).
Select the option to "Uninstall"
The software should uninstall and reboot the machine. When the machine reboots, Deep Freeze should be uninstalled.
Second method (if you don't know the password) is to use a program called Deep Unfreezer v1.6
To uninstall the software Deep Freeze must first be disabled and then uninstalled. To disable Deep Freeze:
Hold down the shift key and double-click on the Deep Freeze icon. Alternatively, you can press Crtl-Alt-Shift-F6. You should now see a password dialog.
Enter your password and click OK. If you have not yet entered a password you should be able to click OK without entering anything. You should now see a dialog with boot options.
Select "Boot thawed" and click OK. This will disable Deep Freeze on the next reboot.
Reboot your machine. After the machine reboots you are ready to uninstall Deep Freeze.
To uninstall:
Locate the installation file you used to install Deep Freeze to this machine. By default the name of this file is called "DF5Std.exe" for versions 5.X and "DF6Std.exe" for versions 6.X.
Run the installation file (DF5Std.exe or DF6Std.exe).
Select the option to "Uninstall"
The software should uninstall and reboot the machine. When the machine reboots, Deep Freeze should be uninstalled.
Please post your feedback and Vote if the problem resolved as per your satisfaction.
To uninstall the software Deep Freeze must first be disabled and then
uninstalled.
To disable Deep Freeze:
Hold down the shift key and double-click on the Deep Freeze icon.
Alternatively, you can press Crtl-Alt-Shift-F6. You should now see a
password dialog.
Enter your password and click OK. If you have
not yet entered a password you should be able to click OK without
entering anything. You should now see a dialog with boot options.
Select "Boot thawed" and click OK. This will disable
Deep Freeze on the next reboot.
Reboot your machine. After the machine reboots you are
ready to uninstall Deep Freeze.
To uninstall:
Locate the installation file you used to install Deep Freeze to this
machine. By default the name of this file is called "DF5Std.exe" for
versions 5.X and "DF6Std.exe" for versions 6.X.
Run the installation file (DF5Std.exe or DF6Std.exe).
Select the option to "Uninstall"
The software should uninstall and reboot the machine.
When the machine reboots, Deep Freeze should be uninstalled.
Disable Deep Freeze before uninstalling it. To disable Deep Freeze:
Hold down the shift key and double-click the Deep Freeze icon. Alternatively, you can press CTRL+ALT+SHIFT+F6.
Enter your password and click OK.
If you have not yet entered a password you should be able to click OK without entering a password.
The Boot Options dialog is displayed. Select "Boot Thawed" and click OK. This will disable Deep Freeze on the next reboot.
Reboot your computer. After the computer reboots, you are ready to uninstall Deep Freeze.
To uninstall:
Locate
the installation file you used to install Deep Freeze on your computer.
By default, the name of this file is called "DF5Std.exe" for versions
5.X and "DF6Std.exe" for versions 6.X.
Run the installation file (DF5Std.exe or DF6Std.exe).
Select the option to "Uninstall"
Deep Freeze is uninstalled and your computer is rebooted.
×