Alternately flashing messages [CF GF] and [3] - this is Electronicon Controller software error - probably the controller memory has been erased by a short circuit or something similar, sorry for the bad news
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I am assuming the oil in the air filter, if its a beltless style would be to keep dust from going inside, like the really old cars were, they called them oil soaked filters. better at trapping dust and dirt.
Hello, I have a compressor Atlas Copco GA11FF which displays the error IN OP and the machine does not start anymore and no button responds .Thank you for helping me Please
Could be the unloader valve did open, Unhook the motor from the compressor and see if you can turn the motor on, then see if the compressor can be turned by hand
×