Sir i have recently purchased IR 400 canon photcopier my problem is the machine is giving error 805 as soon the machine is started I have canon a simlar problem E805-002 but fan rotate properly if i open front cover & fixing side cover its display 805 error
I have ir400 in my machine. first e805 code has been displayed and after that it shows that to load paper. then after e803 code is displayed. please help
The general soluation as sm is below, but I think in your case there are some loose wiring or earting problem.
E805 The fan rotation has a fault.
• The fan has a fault.
• The DC controller PCB has a fault.
• The fan connector has poor contact.
E805 - ........ please see below
0002 Fixing heat discharge fan 1 (FM2)
0003 Fixing heat discharge fan 2 (FM3)
0004 Laser driver cooling fan (FM4)
0005 Laser scanner motor cooling fan (FM5)
0006 Laser scanner motor cooling fan 2 (FM6)
0007 Cleaner heat exhaust fan (FM7)
0008 System cooling fan (FM8)
0010 Low-voltage power supply cooling fan 1(FM10)
0011Low-voltage power supply cooling fan 2 (FM11)
0012 Reader cooling fan 1 (FM12)
0013 Reader cooling fan 2 (FM13)
0014 Drum cartridge cooling fan 1
0015 Drum cartridge cooling fan 2
0016 Drum cartridge cooling fan 3
0017 DC controller PCB cooling fan
0018 Scanner motor cooling fan
E805
Apr 19, 2009- Press additional functions
press #
press + key until display reads #7 printer
press set
press + key until display reads #4 printer reset
press set
press - key for yes
unplug copier wait a minute and plug it back in
This resets E-000 codes maybe that will help
Good luck
I found this on someones elses solution maybe it will help you...
May be one of fan doesn't rotate well there are two fan
Sir i have recently purchased IR 400 canon photcopier my problem is the machine is giving error 604as soon the machine is started problem . plz solve my problem
1,480 views
Usually answered in minutes!
×