SOURCE: Juicelady blender jar replacement
I had the same problem, here is what I found. This was in Feb 2007. Prices may have changed. I called the 800 number. I was taken care of in short order.
Thank you for contacting Salton regarding your JL600. The glass jar (#70379) is available for $31.95 which includes shipping and handling (please include any applicable sales tax for your area). If you would like to place an order for the part, please feel free to do so by using the methods provided below, in addition, please provide the requested information:
• Your name
• Your shipping address
• Your daytime telephone number
• For payment, you may fax your credit card information to 573-447-5205 to my attention or order by phone at 1-800-233-9054.
We will need the credit card number as well as the expiration date. If using Visa, MasterCard or Discover: please provide the three-digit code from the end of your signature line. If using American Express, please provide four-digit code from front lower right corner
• Or, you may mail a check or money order to
Salton Inc.
Attn: Consumer Relations
1801 North Stadium Blvd.
Columbia, MO 65202
If you have any further questions or comments, please feel free to contact us, as we are happy to assist.
Sincerely,
Jessica
Consumer Relations
SOURCE: I have a K-TEC HP3
Usualy there is a rubber ring araound the bottom of the blade. If it gets worn out or out of posistion it may start to leak. Also if you dont have everything screwed in tight enought it could leak as well
SOURCE: replacement jar for hamilton beach wave 50754 blender
Check out the www.goodmans.com. The company is out of Florida and they do not charge sales tax outside of Florida. They have a variety of blenders for sale as well as blender parts. I hope this will help you.
SOURCE: I need a replacement jar for a GE Blender model 169053
By now I'm sure you've given up, but do you still need the jar? I have one that is now useless to me since my son tried to run the blender when the jar and base were not seated correctly and the rotors on both were worn off.
SOURCE: How do I fix or
Make sure the blade assembly is put together in the correct order. The blade needs to go through the gasket so that the order is pitcher glass, gasket, and metal blade base. Then the final plastic cap threaded onto the pitcher. If the gasket is not between the pitcher and the metal blade assembly, you will have leaks.
Also, check the gasket to be sure it's not cracked and that it doesn't have residue on it.
I hope this helps. If it does, please come back and rate my suggestion!
Older KitchenAid blenders had a jar that was
made so the blade assembly could be removed for cleaning. On the newer models
the blender jar and the blade assembly are all one unit so you have to purchase
a new jar to get the blade assembly. All of this is dependent on which
model of blender you have.
We would be happy to help you. Please a give us
a call at 1-800-339-9297 we would be happy to help! One of our repair
technicians can talk you through the repair over the phone free of charge. On
the bottom of your blender is the model and serial numbers; have these handy
when you call so we can help you order the correct part.
We have several blender jars on our Web site http://www.mendingshed.com/kitaidblen.html for KitchenAid blenders. If we don't have the blender
jar that fits your model in-stock we can order it and ship it to you. Please
contact us with any further questions. You can also email your model number or
questions to [email protected]
Sincerely,
Mendingshed.com Staff
66 views
Usually answered in minutes!
×