Washing machine wont spin, water still left in drum

Check motor capacitor first.Try moving the drum and see there is no extra friction. If your washer has got braking mechanism check the brakes also. ( I have no idea about this model regarding break)

It will not spin with water in.
See if you can locate a filter, and clean same.

prolly cuz you didnt check your pockets first and either change or a set of keys fell out

the machine will only drain after the rinses and give it three minutes to reach a pressure setting if this pressure setting is not met within the three minutes,the machine will stop, this sounds like the drain might be slightly blocked try there first, and then the drain pump and sump of the machine.

will the drum go round when on a wash. and is it drianing water out if the drum goes round its not your brushes. if it not emptying water you pump as gone and will not spin if there is water in the drum

Is the belt broke? Have you checked during the wash cycle if it is agitating.

You have a bad pully cam or brake

HI yes you can remove the pump and clean. the pump is the problem

hi sir' start the wash machine empty and see if it happens when nothing is in it.
2. When machine is off, open the top grab the centerpiece inside the wash machine and pull and push it slowly, does it move? (For safety unplug the machine)
3. Make sure machine is 100% level (front to back, left to right)

The most common thing is bad drum bearing, which force the wash machine out of whack when in spin / wash. Which are common and the best thing is to call Maytag. 

thank u .........................................please rate

__________________