Shuts down itself - FUHU nabi Jr. 5" Capacitive Touch Android Tablet for Kids

Don panic Is your laptop shutting off by itself or slowing down during use

You can first try doing what's called doing a Soft Reset. It's the first and preferred method to try as you don't lose any files or settings. Hold the power button until the Nook turns itself off. In most cases that will be twenty seconds or more. Then turn the power back on by holding the power button down for about two seconds. Hopefully this will allow you to complete a normal boot process. The second and more dramatic way to get a working Nook back is what's called doing a Hard Reset. This process will put your Nook back to "Just Out of the Box" mode. You will lose any files and settings stored internally inside the Nook itself. The good part in all this is it won't touch anything stored externally on your external SD Cards. To do a Hard Reset Turn the NOOK off completely. Hold the Power button and Home (n) buttons. The device will turn on. Continue to hold both buttons until the device shuts off once again (~15-20 seconds). Turn the device on normally. It will prompt for a factory reset. Press the Home button twice to confirm. ------- The important part in the above is to be sure you start the Nook via holding down both the power button and the Home (n) buttons at the very same time and keep them both pressed down until the Nook turns itself off.

hard reset or reflash new files

Rebooting is easy. It is called a hard reboot. Just hold both buttons down until you see a red slider, and then slide it to shut down. It will restart, and you will see the Apple logo.

after it gets shut down does it power on again "If u try to on it" or the battry goes to 0% try to keep the tab on charging and pale it on a tabe and then operate it

The problem could be that you are pressing down the power button and the volume button at the same time when you shut down. That will cause an android tablet to reset itself. There may be an issue with the power shut off button.

Make sure the charger is plugged in before attempting this. If already plugged in or same thing happens then you can try and follow the guide as below to do a hard reset:

http://www.mobicpc.com/how-to-hard-reset-archos-97-titanium-hd-to-factory-default-setting.html

If still not able to reset, poss hardware issue

Thanks

It seems that you've already tried reset (holding the home and power buttons, right?) the iPad and it does not work.

So you may need to connect your iPad to your computer and do a factory restore using iTunes.

Check this: http://support.apple.com/kb/HT1414

If you haven't already done so, you have to download the Pogo application from the iTunes app store. If your problem is with the app itself, the first step would be to reboot your device. To reboot the iPad, hold down the button on the top of the iPad until you get the option to shut down the device. Once shut down, press the same button to power on the iPad. Test the Pogo app to see if it works now.

Check in Device Manager to see if there is a problem with the Wireless Network Adapter. If you see a Yellow! or a RedX, then right-click on the network adapter see what the status of it is. It has a troubleshooting section. The only part of your wireless adapter that could possibly shut down the computer would be the driver.