Clean out the water reservoir. Let in make several drop of ice. Drained and rinse out it again. It made almost a full basket of ice. Then it stop making ice, the motor or pump is running and the the scoop continuous jerking.
Sounds like the intake line at the entrance to the refrigerator is plugged with lime residue. It has a needle valve in the center and will clog with foreign material, this can be cleaned out by forcing compressed air pressure backwards thru this connection to remove tiny particles inside.
Testimonial: "Yes I did this. The scoop it staying one position the motor on in run for away then quit. I was able to pump water through the tube a couple times by activating the small toggle switch."
455 views
Usually answered in minutes!
Yes I did this.
However the scoop still jerky and stays in one position. I to pump water through the tube by activating the toggle switch. This worked couple times, but will not. The motor on the scoop runs for the awhile then quit.
In my suggestion I suggested " pussing compressed air thru the controls at the entrance to frig Ice Maker in back" this need to be physically removed and held in your hand to blow ait backwards thru it. Involves shutting off your water supply to frig and removing the lines in front and behind on frig to remove unit to be cleaned.
×