- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Just off the top of my head, I'd say your recovery disk is corrupt.
var fctb_tool=null;
function FCTB_Init_a69435351fb74e90a741cf9ee86e2b92(t)
{
fctb_tool=t;
start(fctb_tool);
}
var fctb_tool=null;
function FCTB_Init_75456083c0a940ed84ebdf7c4ad1e8e6(t)
{
fctb_tool=t;
start(fctb_tool);
}
How do I resolve the error message "System status failed" (error code 3807)?
To resolve the error message "System status failed" (error code 3807):
Disconnect the power adapter from the printer. Wait 30 seconds to allow the printer to reset. Connect the power adapter to the printer. Turn the printer on if necessary
If the error continues: Open the printer access door. Remove and install the printhead two times. Close the printer access door. Wait until the printer is ready to use.
If the error is resolved, upgrade your printer's firmware.
You need to be very careful Each failed attempt causes a long delay before you can enter it again. Follow the instructions exactly. You may need to use the car for a day or more before attempting it again if you failed too many times. The radio should say CODE not ERROR. Error means no code can be entered now. You must wait until the radio displays CODE.
×