Please follow this steps and fix it. God bless you
1
Remove the screws or bolts securing the ends of the pedals to the crank axles. Slide the ends of the pedals off the axles. Remove any screws or bolts securing the left and right disc shields to the base unit. Pull or pry the disc shields off the base unit and set them aside.
2
Remove any screws or bolts securing the left and right side shields to the base unit. Detach the side shields and set them aside. Examine the interior of the base unit and locate the drive belt.
3
Pull the drive belt free of the crank pulley, flywheel and any other pulleys. Discard the old drive belt and install a new belt in its place. Turn the crank axles by hand to confirm that the belt will turn smoothly when the device is in use.Detach the ends of the pedals from the crank axles. Spread a layer of machine grease over the crank axles, then reattach the ends of the pedals.
2
Remove the bolts connecting the pedals to the swing arms. Detach the pedals from the arms, then spread a layer of machine grease over the axles on the swing arms. On some models, the bolts may also serve as the axles. Reattach the pedals to the arms.
3
Remove the bolts connecting the swing arms to the elliptical's upright. Detach the swing arms from the upright, then spread a layer of machine grease over the axles on the upright. Reattach the arms to the upright.
Testimonial: "Thanks. I will try it over the weekend an post back. I appreciate your help. It feels like it is hitting at the top of the left pedal rotation. It does not do it all of the time and it seems like I can effect the amount of clunk/resistance depending upon how much pressure I put on either pedal. Also, it is worse when the resistance is up higher."
Thanks. I will try it over the weekend an post back. I appreciate your help. It feels like it is hitting at the top of the left pedal rotation. It does not do it all of the time and it seems like I can effect the amount of clunk/resistance depending upon how much pressure I put on either pedal. Also, it is worse when the resistance is up higher.
o.k. Thanks . God bless you
×
464 views
Usually answered in minutes!
×