Troy bilt super tomahawk manual - Troy-Bilt® Briggs and Stratton Chipper

Anything will run on a 40 thou gap. Ensure the plug is clean and dry around the electrode, sandblast if possible. Any debris in the plug base will cause shorting. Remove ALL carbon deposits. Check integrity of the plug lead.

Best Manuals You couldn't ask for a better place!

you can get guides online for error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thing is covered
within seconds u can get the access and it's totally illustrative complete
I know these websites

how do i chanebelt on super tomahawk chipper

Hi and welcome to FixYa. I am Kelly.

Go to this site:

http://www.brentchalmers.com/

I note your looking for the Super Tomahawk. If you can come up with a model number I think I can find your parts manual for sure. (or at least an on-line parts list.) Also.... If you can come up with an engine number like OH120 or L90 off of the engine I can find you a manual for the engine also.

This is the list of Manuals available there:

1983 W-W Grinder Inc. Manual and Parts List Super Tomahawk 5-8-2G/C and Tomahawk 5-8-2G/M Chipper/Shredder (40 Pages)

1989 Troy-Bilt Owner/Operator Manual Junior Tomahawk Chipper/Shredder (24 Pages)

1989 Troy-Bilt Technical Manual 4HP, 5HP, & 8HP Models Tomahawk Chipper/Shredder (12 Pages)

1991 Troy-Bilt Owner/Operator Manual Junior Tomahawk Chipper/Shredder (24 Pages)

1991 Troy-Bilt Knife Kit number 1772231 (1 Page)

1992 Troy-Bilt 5HP Model Service Kit (Part Nos. 1901153 and 1901804) For Chipper/Vac (1 Page)

1992 Troy-Bilt Owner/Operator Manual 47260, 47261, 47271, 47272 Chipper/Vac (60 Pages)

1993 Troy-Bilt Sales Brochure Chipper/Vac (4 Pages)

1993 Troy-Bilt Owner/Operator Manual 47265, 47266, 47267, 47276 Tomahawk Chipper/Shredder (44 Pages)

1993 Troy-Bilt Parts Catalog 47265, 47266, 47267, 47276 Tomahawk Chipper/Shredder (16 Pages)

1994 Troy-Bilt PTO Chipper/Shredder Owners Dog Clutch Kit 1902404 (1 Page)

Hopefully your model is one of the above.

Here is link to the Parts manuals:

http://www.partsandservice.com/html/TroyBilt/cs/

There are 90 parts manuals there.

Again with a good model and engine number I can probably come up with your exact manuals.

Thanks for chosing FixYa,

Kelly

Taked the broken belt to the auto parts store for a replacement.

Hi,

Here: http://www.brentchalmers.com/

Keep all of those fingers out of the shredder!

Hope this helps, if so pls leave feedback, if not let me know!

Straight 30w NOT 10w-30

prefer air-cooled engine oil from mower dealers or some auto supply stores have air cooled engine oil.

I’m happy to assist further over the phone at https://www.6ya.com/expert/rolandw_c013176d62ee17ae

did you find a manual? mine is 8hp Super Tomahawk, model 47258. I have manual, but not parts diagram. I need parts, flails and tamper. Got any leads? twinblade88 at hotmail dot com

I have the both the manual and parts catalog for Troy-Built 8hp Tomahawk, can send them to you for the cost of coping and postage if you haven't found them yet.
Ron Bowman, [email protected]