Hi, i just replaced the water filter (model DD 7098) of my Daewoo refrigerator model FRS-2031EAL, following the steps exactly like thu user guide says, water is running clear and pressure is higher because a lot of dirt came off, but the red light that indicates replace is still on. Thanx in advance for your advice
Press and hold "ICE MAKER LOCK" button, and while holding it shortly press "LOCK" button, and the light will change to green LED.
Ivan
Press and hold "ICE MAKER LOCK" button, and while holding it shortly press "LOCK" button, and the light will change to green LED.
Thanks it was the perfect solution for replacing the red light to green
GREAT !!!
(1) Hold down "ICE MAKER LOCK"
(2) Press "Lock"
(3) Open fridge and pour yourself a nice cool drink to congratulate yourself for turning off the red light
THAT WAS WORK
(1) Hold down "ICE MAKER LOCK"
(2) Press "Lock"
(3) Open fridge and pour yourself a nice cool drink to congratulate yourself for turning off the red light
Firts read the owen´s manual,
Most models also have a filter indicator reset button located in the same area. After changing the filter, reset the filter status light by pressing the Filter Indicator Reset button or by pressing and holding the Filter button for 3 seconds. The status light will change from red to green or the status display will change from "Replace" to "Good" when the system is reset.
If your model has a water filter indicator, but no reset button, press the light switch in the refrigerator compartment 5 times within 10 seconds to reset the system. The status light will change from red to green when the system is reset.
The water filter status light, located at the top of the refrigerator
compartment, will help you know when to change your water
filter cartridge.
Style 1 - Standard status light (on some models)
When the water filter status light changes from green to yellow,
this tells you that it is almost time to change the water filter
cartridge (90% of the filter life has been used). It is recommended
that you replace the base grille water filter cartridge when the
water filter indicator light changes to red OR water flow to your
water dispenser or ice maker decreases noticeably. See
"Changing theWater Filter Cartridge" later in this section.
After changing the water filter cartridge, reset the water filter
status light by pressing the light switch 5 times within
10 seconds. The water filter status light will change from red to
green when the system is reset.
If you need Adobe Reader Click=> Adobe Reader X (10.1.0) (50.25 MB)
If helpful please rate this solution, Thanks Sea Breeze
Click Photo Below for User Manuals
Reset Filter (select models)
When a water filter has been installed in the
refrigerator, the yellow Order light will illuminate when
90 percent of the volume of water for which the filter is
rated has passed through the filter OR 11 months have
elapsed since the filter has been installed.
The red Replace light will illuminate when the rated
volume of water has passed through the filter OR 12
months have elapsed since the filter was installed. A
new filter should be installed immediately when the
Replace light is illuminated.
After replacing the filter, press and hold the Reset
Filter pad for three seconds. The Order and Replace
lights will go off.
Vacation Mode
The Vacation Mode feature causes the freezer
to defrost less frequently, conserving energy. The
Vacation Mode indicator light will illuminate when the
feature is activated. To deactivate, press the Vacation
Mode pad again OR open either door. The indicator
light will go off.
Temp Alarm
2,069 views
Usually answered in minutes!
I have just installed a GE GSH25JSTSS, SIE-BY-SIDE REFRIG. I installed the filter and verified watter pressure from walll valve is high. However, a few drops came of of the door and then nothing. Now, the Locked light is on and I can't get any button (including the light) to actuate. So... how to unlock this refrig and get water coming out of door? It is only 2 hours old, so I don't have ice yet. I hope it makes ice.
Thanks
Mike, Houston
Hi - had the water connected to my fridge freezer at Christmas. The red light came on within 6 weeks of the connection. I now desperatelty need to put a new filter in as the water tastes funny. However, I have no manual and have looked at the internet for instructions. I can't believe that I have to pull out the appliance (i know that I will mark my new floor) and am not confident with what it says I have to do. Please explain in simple terms. Thank you.
M
I have a Samsung RS2578BB,I have moved lately and misplaced my manual. I need to turn filter red light off?
Johnboy50
I am have a Refrigerator Model# FFHWS2622HW3 the filter will not seat in. Before installing new filter I turned off water and bled the pressure off the line. This is a Pure 2 filter in the upper right corner.
Filter will not seat even after bleeding pressure off the line and turning off water Model# FFHs2622HW3
×