No display
The first thing to try, is to look on the motherboard for the CLRCMOS2 terminal pins, this allows you to clear the data in CMOS.
The data in CMOS includes
system setup information such as system password, date, time, and system
setup parameters.
To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power
supply.
After waiting for 15 seconds, use a jumper cap to short the Clear
CMOS jumper for 5 seconds. After shorting the Clear CMOS jumper, remove the jumper cap.
If you have changed the ram make sure it's compatable, but if the above has
×