Question about Crosley CCW5294W Top Load Washer

1 Answer

Water won't stop filling up

The water won't stop filling up. The water overfilled and went all over the floor. In order for me to shut it off I had to turn off the water from the pipe in the wall. I had to manually move the nob to the drain and spin cycle for it to drain. Please help!!

Posted by on

  • Anonymous Sep 17, 2008

    My machine lets water just drain on through, never filling the tub.

  • joannmsd Sep 30, 2008

    My washer overflows too. Had to buy a shopvac.

    The water stops when I press the timer button, but I have to manually turn to the spin cycle to get the water to empty.

    Washer model number is

    CW7500W

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 209 Answers

There is a fault in the pressure switch, all machine have a pressure switch, this is normally a part about 5 to 8 cms in diameter and about 3 to 5 cms thick with a small pipe running down to the bottom of the drum or some part quite low on the machine that holds water. maybe a drain pipe the pressure switch is located near the top of the machine inside the cabinet somewhere you should be easily able to get to with the lid or back off THIS THIN PIPE could be BLOCKED or has been damaged, it works by the weight of the water pushing air up this pipe to activate the switch, if the machine has been laid down or tipped up it can sometimes be reset by draining every bit of water from the machine, first by pumping the normal way, then unplug from mains and remove a pipe from the pump and drain the last bit out, this sometimes lets the pipe reset itself best of luck, if i have helped please rate me

Posted on Oct 07, 2007

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won't Fill and will attempt to run wash cycle when turned off and door is closed


Hello ddux97 - I understand your dishwasher has power but will not fill with water. Here are a few simple troubleshooting tips that may help you resolve this issue:

• Make sure water supply is turned on. (First check for shut off valve under the kitchen sink).

• Check the house circuit breaker or fuse box, reset circuit breaker or replace fuse.

• Check inlet hose and make sure it's not twisted.

• Does float overfill protector (mushroom shaped object in tub) move freely? This is located in the bottom left front corner of the dishwasher.

• If this is a new install, then make sure the unit is not pressed up against the cabinet and the fill tube is not squeezed closed.

• Make sure the electrical wires going to the water inlet valve have not come off. It is best to turn off power to the dishwasher before reconnect wires, it doesn't matter which terminal is off both need to be connected.

• Make sure the drain hose is installed correctly. If the drain hose is routed under the floor as the dishwasher fills water can be drawn from the tub and appear to have never filled.

• Some models of Frigidaire dishwashers use a water pressure switch that will shut off the water valve if the tub over fills. These models do not have floats.

I hope these troubleshooting tips help you in some small way.

Jun 20, 2013 | Frigidaire 24 in. PLD2850 Built-in...

1 Answer

GE Super Capacity Plus won't stop filling


Does it stop if you stop the cycle or do you need to turn the valve off?

What is the complete model number of your unit?

Feb 17, 2013 | GE 3.2 cu. ft. Washer

1 Answer

The washer is having the following issues. Overfills excess water drains out on the floor down the overfill pipe. Washer cycles and doesn't spin.


The float on the water level shut off valve is probally stuck and not telling the washer that its full and to turn off the water. once thats fixed it will probally cycle normally. Try it on half load and see if the water stops at the correct spot.

May 15, 2011 | Washing Machines

1 Answer

Overfilling with water after i took it apart to replace a hose. water wont stop running.


YOUR FILL VALVE IS NOT SHUTTING OFF GET A NEW ONE ON LINE SHIPPED TO YOUR DOOR IS THE BEST PUT ALL INFO IN ORDER A FILL VALVVE AND YOUR IN BUSINESS

Jan 14, 2011 | Whirlpool LSR5132PQ Top Load Washer

1 Answer

Wont stop filling up. It will overflow with water


Hi


Thanks for using FixYa. Overfilling in your washer occurs mainly due to two things: water inlet valve going bad and/or the water level switch. If the water inlet valve has gone bad it won’t be able to shut off even when the electricity has been turned off. If the issue is with the water level switch then it won’t tell the water to shut off and the machine will overflow as this switch is to sense the water level in the clothes tub. However, with that being said it seems that you’ll need to replace the water inlet valve. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Aug 22, 2010 | Frigidaire Gallery GLWS1339EC Top Load...

1 Answer

Neighbor reports It's overfilling Water on floor.


Could be a faulty water level switch ,or blocked pressure chamber hose leading to switch, or a sticking water inlet valve, question of elmination I'm afraid.

Mar 07, 2010 | Maytag PAV2300 Top Load Washer

1 Answer

Flashing FL


Hi

If you have error code FL it means flood condition i.e. FL flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the overfill switch to trip. The control must realize that the trip was due to an overfill condition instead of a suds lack condition in order for FL to be displayed. With an overfill condition, the beeper repeats a warning every 10 seconds with no time-out. The pump is cycled in drain mode for 30 seconds on, 30 seconds off until the overfill switch resets or power is discontinued to the unit. Press STOP/CANCEL to clear the display.

If its LF which means long fill i.e. when the water fill time exceeds ten minutes, the water valves are turned off and LF is flashed. Press STOP/CANCEL to clear the display.

Please do rate the solution and revert for further assistance.

Thanks
Rylee

Sep 10, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Wahser does not stop filling water


replace the water inlet valve

May 03, 2009 | Washing Machines

1 Answer

Estate washer, new, water will not stop, overflowing


you need to replace the inlet valve something is stuck in the valve not allowing it to shut.

Dec 23, 2008 | Whirlpool Estate TAWS750PQ 27-Inch Washer

1 Answer

Kenmore Elite Calypso


FL" flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the overfill switch to trip. This could just be a fluke, or you could have a possible bad pressure switch that is not shutting off the water supply correctly. In addition, fill valves have been known to short out causing water to constantly fill in the wash tub. Lastly, your household water pressure could be too low and won't shut the fill valves off properly. Inlet water pressure should be a minimum of 10-20 psi. With an overfill condition, the beeper repeats a warning every 10 seconds with no time-out. The pump is cycled in drain mode for 30 seconds on, 30 seconds off until the overfill switch resets or power is discontinued to the unit. Press STOP/CANCEL to clear the display. I hope some of this leads you in the right direction.

May 12, 2007 | Kenmore Elite 21086

Not finding what you are looking for?
Crosley CCW5294W Top Load Washer Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crosley Washing Machines Experts

peter gittos
peter gittos

Level 2 Expert

247 Answers

jdthefixer

Level 3 Expert

746 Answers

Derek Bannister
Derek Bannister

Level 2 Expert

101 Answers

Are you a Crosley Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...