I've got a Z27X22D, older Zenith with a significant vertical overscan. It is such that it's impossible to read crawls and such at the bottom of the screen. I came across a code to get into the service menu, but it only covers screen position, not screen size, and I need to reduce the vertical size a smidge. The code I had (that doesn't seem to access the size menu) was Menu (hold until menu disappears but channel info is still up), 9-8-7-6- Enter. Anyone have a clue for any other service menu access code?
Significant vertical overscan. It is such that it's impossible to read crawls and such at the bottom of the screen. I think this problem is a tv problem. it is due to vertical section. please change electrolytic capacitor in vertical output section. it will be ok. it is common problem can be fixed at home & very simple.
387 views
Usually answered in minutes!
Me again. I should add that, at one time, a TV service tech friend told me over the phone how to adjust the vertical and horizontal size, so it's got to be in there someplace.
×