Lg washer oe error

This is the fix for the oE error code.
https://m.youtube.com/watch?v=V04PvdyWVTM

replace the drain pump

Hi,
Here is a tip that I wrote that gives more detail about how to fix the OE codeon LG washers....

LG Washing Machine OE Error Code
heatman101

Hello & Welcome to FixYa

Correct, OE is a drain error and is displayed when the washer is unable to drain water. Please check the drain hose and drain pump filter located inside the bottom front panel for any clogs to clean the error. Please get back to me if you have any other questions.

Kevin

Hi,

Here is a tip that I wrote about the LG OE Code and the causes and fixes...

Here also is the complete list of LG Codes

heatman101

,./,

OE is a drain error - Check there isn't a kink in your drain hose, ensure the filter is clean, the drain hose can become clogged with sludge, sometimes a hot wash with 1/2 a cup of vinegar will remove this sludge

Hi,
The most common cause of an OE error code on a modern LG dishwasher is:
1. Blocked drain hose
2. Obstruction in the sump area (beneath the filter, which needs to be removed to check for onstruction)
3. Failing drain motor. 
else you need to REPLACE THE PCB POWER CONTROL BOARD
Good Luck!!!

check the drain filter in the bottom left corner behind the access door

oe is an error code for pump problem disconnect power cord open small door on lower front of cabinet pull little tube out and plug from tube and drain water in to bucket after water is drained unscrew cap of pump to clear out any obstructions reinstall the cap and plug and give a test run

OE means it has not fully drained with in 10 mins. You may have something in the drain. Open the little door on the front, ust the small hose to drain it first, then take out the button trap. If you don't see anything, you can also check your drain hoses and if you want tilt back the unit, support it with something and look in the bottom hose make sure you don't have a sock or something there.

Sgt 48