Avanti water cooler

Hallo

The solenoid at the back of the fridge is suppose to get 230V when the leaver is pressed test the currency and if you het 230V the solenoid is faulty and needs to be replaced other wise its the switch on the leaver that's faulty.

regards

Avanti FF1008W (97 cu ft) Top Freezer Refrigerator Cold ...

www.fixya.com/search/...avanti_ff1008w_top_freezer_refrigerator/cold

Avanti FF1008W (97 cu ft) Top Freezer Refrigerator, cold related issues. ... by side cold but not cold enough frezer cold but not enough to freeze Fans blow when ... Kenmore cold spot model 106.73282301 not cold in fridge and freezer isn't as ... the unit initially cools, then when camping in cold weather, it does not restart to ...

Avanti FF1008W (97 cu ft) Top Freezer Repair Questions ...

www.fixya.com/.../p1394527-avanti_ff1008w_top_freezer_refrigerator

Recent Avanti FF1008W (97 cu ft) Top Freezer Refrigerator questions, ... Free expert DIY tips, support, troubleshooting help & repair advice for all Refrigerators. ... The cooler isn't working On avanti model WC681BG-2 ... Avanti 308ywt compressor keeps running but frig will not get cold ... Does not cool anymore, still runs.

Avanti FF1008W (97 cu ft) Top Freezer Refrigerator Power ...

www.fixya.com/search/...avanti_ff1008w_top_freezer_refrigerator/powe...

Avanti FF1008W (97 cu ft) Top Freezer Refrigerator, power related issues. ... Power back on and the door ice dispenser unit says: Power Freeze - 88 Power Cool - flashes ... Refrig lights came back on but not tempature lights well u have a problem of ... refridge stopped working after a power surge fridge was plugged into a ...

I ve glacier bay hot/ cold water dispenser - new product. Cold water is coming but no hot water. Water is not coming. What have I to do it is a week old machine.

Check the fuses

water cooler does not run or dispense water

avanti water dispenser WD50 where is the
filter

It is oin the refrigeration unit, if it is not the power ie. outlet. Then not much you can cost effectively do. Could be compressor, dirty coils, thermostat or leaking refrigerant.

I’m happy to help further over the phone at https://www.6ya.com/expert/josh_87ce33216d7b2148

The water selector valve is fautly and needs to either be stripped and cleaned or replaced.

Hello! About 2 weeks ago, the same problem began on my Hamilton Beach water dispenser.
Last week, I called the HB service support, and they told me to do the following reset procedure:

1. Dispense 3 cups from the HOT water side, and also, 3 cups from the COLD water side.
2. Turn BOTH back switches OFF (the ones on the back of the water dispenser).
3. Unplug the dispenser, and LEAVE it unplugged for 24 hours.
4. After 24 hours, turn the back switches ON and plug it in.
5. Leave it on for 4 hours WITHOUT dispensing any water.

...it's been about 12 hours since I've dispensed water again for the first time, and so far, SO GOOD! I'll update if the problems reappear.