When I turn it on it says Realtek PCIe FE Family Controller Series v1.23 (07/28/10) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM. Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key_ I looked in BIOS and it does not detect my hard drive. I put a new one in and it still will not detect it. I checked the cable and it is connected properly to the motherboard. I also looked at the solder on the motherboard and it seems to be just fine. When it went down, it did it slowly. It gave me problems starting up then would start in safe mode then eventually went to a blinking underscore. Now I just get this message.
I think the realtek PCIe controler is your video display controler
This issue is often caused by either an incorrect setting in CMOS Setup or a bad boot device, such as a bad hard drive.
×
162 views
Usually answered in minutes!
×