At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check the main earth wire near the battery. and one near the rear of the lights. unbolt them and clean the connectors up put some grease on them after. then check again. remember that when the earth wires come off the radio code will be needed to reset the the radio. be safe and take the battery off.
Download the service manual to your set. It will have all details. blinking of standby light is fault codes. These codes and repair proceedings will be detailed in the service manual.
Visit this site to get all details about this fault, and get information about how to repair this. The site name is "Electro-help". Type it in either Google or Yahoo search box, and click search. Don't forget to type in (hyphen) in between words. The site can be seen by this name.
PUK code comes with your phone sim card when you bought it.Try locating where the whole box or package of your phone. Some sims comes with a manual and usually the puk code are written in there..Others comes like a regular size card and you have to detach the sim from there..in this card thee should be two Puk code that is written.. Hope that this info has help you in anyway..have a nice day..
I don't have a clue what you are trying to ask. Are you wanting to know where the parking light wire locations is, the emergency flasher relay is, etc.
Hello Bren,
You can leave it blank, no problem!
Additional info, comes from Microsoft:
"Some ISPs do not require that you enter a PPPoE server name on the PPPoE Settings screen. Contact your ISP to verify whether they require that you enter a PPPoE server name. If your ISP does not require that you enter a PPPoE server name, leave the Service Name box on the PPPoE Settings screen blank."
×