How do you replace the light bulb in the KBMC140HSS03

Amazon and any hardware stores should sell replacement bulbs for microwaves. Or you could get someone that fixes small and major appliances to replace the bulb in your microwave for you.

1. Unplug the Magic Chef microwave from the wall outlet.
2. Remove the screw from the light cover located on the left side of the underside of the microwave. ...
3. Unscrew the light bulb, then screw in the new light bulb.
4. Raise the light cover, then secure the cover with the screw that was originally removed.

More items...

How to Replace a Magic Chef Microwave Light Bulb ' Hunker

https://www.hunker.com/13407988/how-to-replace-a-magic-chef-microwave-light-bulb How do change the light bulb in magic chef microwave Google Search

The support page with free manuals is here.
http://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=MMV5208WW1&siteCd=WHRCOM&userType=Consumer

The owner's manual says:

Cavity light: The cavity light bulb is located behind the vent
grille at the top front of the microwave oven, under the bulb
cover, and is replaceable. Remove two screws on the vent
grille, tilt the grille forward, and lift it out. Open bulb cover and
replace bulb. Close bulb cover, replace vent grille, and secure
with screws.

Cooktop light: The cooktop light bulb is located on the
underside of the microwave oven, and is replaceable. Remove
bulb cover screw, and open the bulb cover. Replace bulb,
close bulb cover, and secure with screw.

To remove the grille, see my video at microwavecontrol.com.

The cooktop light bulb(s) is(are) located on the underside of the microwave oven, and is(are) replaceable. Remove bulb cover screw, and open the bulb cover. Replace bulb, close bulb cover, and secure with screw. Cavity light: The cavity light bulb is located behind the vent grille at the top front of the microwave oven, under the bulb cover, and is replaceable. Remove 2 screws on the vent grille, tilt the grille forward, and lift it out. Open bulb cover and replace bulb. Close bulb cover, replace vent grille, and secure with screws.
For more information, your owners manual can be viewed here (scroll to the bottom of page 4):
Maytag MMV1164WB Owners Manual Page 4

Hello Jim Rogosheske - To replace light bulbs, first I suggest disconnecting power to the microwave oven at the circuit breaker panel or by unplugging. To release cover, remove the screw on the light cover. Replace light bulbs with equivalent watt bulb available from your manufacturer or a parts distributor that they recommend. Bulbs are also available at most hardware stores or lighting centers. However, it is not recommended to use a bulb larger than 30 watts. Close light cover and secure with screw that was previously removed to release cover. Be aware that light cover may become very hot. Do not touch glass when light is on.

Hello & Welcome to FixYa

To replace the light bulb first remove the screws located on the vent grill at the top of the microwave, tilt the grill back and then pull away to remove. After this open the light cover , you have to remove the screws so that you can discard the old light bulb and then replace it with a new one. Please get back to me if you have any other questions.

Kevin

That's covered on pages 35 & 36 of the owner's manual here.

Cooktop Light/Night Light

On models JVM1850, JNM1851, DVM1850 and
EMO4000, replace the burned-out bulb with a 120 volt,
40-watt incandescent bulb (WB36X10003), available
from your GE supplier.

On models JVM1870, JVM1871, JVM2050 and
JVM3670, replace the burned-out bulb with a 120 volt,
20-watt halogen bulb (WB36X10213), available from
your GE supplier.

To replace the bulb(s), first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug. *

Remove the screw at the left edge of the light
cover and push on the right edge of the cover
to open.

Be sure the bulb(s) to be replaced are cool
before removing. After breaking the adhesive
seal, remove the bulb by either gently turning
(for models JVM1850, JNM1851, DVM1850 and
EMO4000) or pulling straight out (for models
JVM1870, JVM1871, JVM2050 and JVM3670).

Replace with the same size and type bulb.

Raise the light shield and replace the screw.
Connect electrical power to the oven.

Oven Light

Replace the burned-out bulb with a 120 volt, 20-watt
halogen bulb (WB36X10213), available from your
GE supplier.

To replace the oven light, first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug.

Remove the top grille by taking out the screws
on top of the grille that hold it in place and
sliding the grille to the left (opening the door
makes grille removal easier).

Next, remove the light cover.

On some models, the light cover is located
in the center of the top opening. Remove the
screw that secures the light cover and lift the
cover off.

On some models, the light cover is located at the
left of the top opening. Lift the cover off.

Pinch the clips that hold the light socket in
place and lift the socket out.

Remove the bulb from the light socket by
pulling straight out. Replace with the same size
and type bulb, then replace the light socket and
cover.

Replace the grille and screws. Connect electrical
power to the oven.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

* If your control board was damaged (lights won't come on, won't go off, fan or turntable not working right) after a cooktop light bulb blew or was inserted or removed while power was on, see here.

Your membrane keypad is shorting.

It comes as an assembly, so it's pretty easy to replace yourself. It is part number 4453420 and you can get it here for $235.33 plus shipping.

You can also find helpful exploded views at that link.

The picture below shows you how to unlock a typical membrane keypad connector.



We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

From the owner's manual:

Cooktop Light/Night Light

On models JVM1850, JNM1851, DVM1850 and EMO4000, replace the burned-out bulb with a 120 volt, 40-watt incandescent bulb (WB36X10003), available from your GE supplier.

On models JVM1870, JVM1871, JVM2050 and JVM3670, replace the burned-out bulb with a 120 volt,
20-watt halogen bulb (WB36X10213), available from your GE supplier.

To replace the bulb(s), first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

Remove the screw at the left edge of the light cover and push on the right edge of the cover to open.

Be sure the bulb(s) to be replaced are cool before removing.

After breaking the adhesive seal, remove the bulb by either gently turning (for models JVM1850, JNM1851, DVM1850 and EMO4000) or pulling straight out (for models JVM1870, JVM1871, JVM2050 and JVM3670).

Replace with the same size and type bulb.

Raise the light shield and replace the screw.

Connect electrical power to the oven.

Oven Light

Replace the burned-out bulb with a 120 volt, 20-watt halogen bulb (WB36X10213), available from your
GE supplier.

To replace the oven light, first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

Remove the top grille by taking out the screws on top of the grille that hold it in place and sliding the grille to the left (opening the door makes grille removal easier).

Next, remove the light cover.

On some models, the light cover is located in the center of the top opening.

Remove the screw that secures the light cover and lift the cover off.

On some models, the light cover is located at the left of the top opening.

Lift the cover off.

Pinch the clips that hold the light socket in place and lift the socket out.

Remove the bulb from the light socket by pulling straight out.

Replace with the same size and type bulb, then replace the light socket and cover.

Replace the grille and screws.

Connect electrical power to the oven.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

I a Kitchen Aid Buit-in microwave (KEMC308KSS01) with the same problem - light went out. Can you send me the instructions on how to replace the bulb? Thank you! [email protected]