Cisco spa525G - call on hold reverts to speakerphone automatically. The speakerphone is not lit so if you hit it to talk privately, the call disconnects.

As long as it has Bluetooth.

your cell phone probably has an internal speaker for you to hold the phone up to your ear and talk and an external speaker that is used for the ringtone and for you to use the talk on speakerphone option. You can try to use the speakerphone to speakerphone and see if you can hear your callers.
If you phone's internal speaker is not working, the phone needs to be repaired or replaced.

There is, but these settings are setup in Call Manager, or Call Manager Express. I would see your systems admin to set the default priorities.

Try using username (none) pass public/private/secret or
cisco - cisco, ADMIN - changeme, pixadmin - pixadmin, root - attack, superuser - superuser as username - password. These are the defaults credintials for the Cisco routers.

Stelios.

i hope it has only the offer to talk or radio on.
even my mobile ve same thing.it ll either in radio mode or in talk mode.
both never be activated together

Remove the battery, hold the power key for 10 seconds. Re-install the battery, power up, issue should be resolved.

Heres The Answer, Use The Data Cable the Dash Came With And Hook It Up 2 The PC. That Should Fix this Issue Instantly

This is because the speakerphone and the earphone are 2 different speakers. Which means your earphone is blown, or something is wrong in your settings, check your different volumes.

That isn't a problem, how to you expect to talk on an open phone anyways? INTERNET

push the talk button again