Hi. I need a Sears Craftsman 16 volt battery charger, part #320.10321 or #320.67099 for a Craftsman model #320.29036 16 volt cordless drill, battery #320.29006. Can you locate either one of the battery chargers/adapters?

look on eBay. my opinion is toss it as the batteries are Ni Cad and have a short life

Try asking on KIJIJI in the want ads some one might have one that the batteries or drill is shot.

See if you can put a volt meter on the metal contacks of the charger to see what voltage it is producing. If you have a friend who has the same drill have him try to charge your batteries and then measure the battery voltage.

you have a short in the battery or charger,,,very dangerous ,,the batt could explode

go to the sears site and you will find the manual button, click it and when prompted enter the model number of the drill. mine is 315.116890 for my 19.2 volt drill.

Unless you find one on e-bay or craigs list you are out of luck, Craftsman is only sold at Sears and a few K-Mart stores.

sounds like my charger, not making good contact

wiggle the battery around while pushing down and you can probably get it to make contact

sounds like you just need a new charger

try wiggling the battery around and see if a light flashes

also look and see if a light flashes when you plug it in

i'm about 98% sure it's the charger

those unit were made for sears check there web site. the part number my tell you MFG of the unit. if not you'll have to buy it from sears