Need parts blades mtd

SOURCE: Parts

Go to McCullochpower.com and under power equipt click on pressure washer follow the links till you get to page about ordering parts and you will need your exact model number but the parts can be ordered online or there is a link to find a dealer near you. Let me know if you still need more help

Brad Wilkinson

• 106 Answers
• Posted on Sep 16, 2009

SOURCE: What blade does a McCulloch Pro-Mac 3805 AV - 18

if it has a 18" bar the chain should be a 3/8 pitch .050 guage and should be a 60 drivelink chain... the safest way is to take the old chain with you when you buy a new one then they can be certian

Testimonial: "Thank you"

SOURCE: Need to remove & replace primer bulb on mcculloch mac 3516

There are 4 different IPLs for this saw. Fuel detail are on multiple illustrations.
http://www.ordertree.com/modelinfo/MCC/22-600035-18-Mac-3516-IPL-211318-01/139.22-600035-18-Mac-3516-IPL-211318-01.1.59.1.html
A helpful video, a few of my suggestions, and a schematic follow:
Fuel Line Replacement by SmallEng.com
http://www.youtube.com/watch?v=JrXpU70Hmi0

• The hose in the tank with the filter on the free end connects directly to the carburetor input connection.
• If the saw is equipped with a primer bulb, an output line from the carburetor connects to the suction side of the primer (once the bulb is collapsed it draws fuel from the tank through the carburetor to refill as it inflates).
• The pressure side of the primer returns displaced fuel to the tank as it is depressed.

SOURCE: I have a McCulloch Mac 110 mini-Chain saw that

Hello Kip;
If the new bar is not the same size as the old chains will not fit. Count the drive links on your chain.


If your 44 your bar is 12", if your 49 your bar is 14", if your 54 your bar is 16" and finally if your 60 your bar is 18". If not of the following your chains will need to be professionally resized to fit (select 110 not Mac110 please).
Oregon Bar & Chain Selector
http://www.oregonchain.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
I seriously doubt you saw needs an "Intenz" bar.
The Oregon part number you choose can easily be converted to a different bar manufacturer's part number.

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

SOURCE: McCulloch Chainsaw electrimatic EM250-14 how

I am not a great beleiver in electric sharpeners, they get the cutters too hot, this case hardens them making them brittle and they lose there edge quickly, they can no longer be sharpened with a file as they are like glass, purchase a good roller guide sharpener from a Husqvarna dealer, they are simple to use and work well.