We've lost the manual and can't figure out how to thread the large spool.
Here's the Janome instructions!
http://janome.com/index.cfm/LearningCenter/Techniques/General/Winding_A_Bobbin
...Thread the machine from the spool, left to the guide on top/rear, over the top towards the front, around the tensioner down through the large channeled guide below it and up (picking up the thin wire guide on its way) around the take-up lever from right to left, down through the semi-hidden guide, through the needle clamp guide and thread the needle through the front to the back.
307 views
Usually answered in minutes!
×