How do I program a JVC RM-C18G remote - JVC RM-C18G-1H Remote Control

Tracy Spears

• 1 Answer
• Posted on Nov 10, 2008

SOURCE: Remote Codes

If you are willing to sell that remote I am interested please let me know. My dog ate mine. My email is [email protected]. Thanks and good luck!!

SOURCE: picture has lines and goes black after warm up

Try unplugging for 2 mins. Or press power button for 30 seconds. Your Light in the tv might be shot.... happens every 5 or so years.
GOOD LUCK
CNBY

SOURCE: How to program JVC Remote RM-SXV067A Remote to TV

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
5.