OC failure after changing power supply

I just changed my power supply but when I start the PC its giving a OC failure error and then it shuts down by itself..This is a Gigabyte GA-945GM-S2 motherboard.

1 Answer

Lars Olsson

Gigabyte Master 3,400 Answers
Posted on Jun 11, 2013

Lars Olsson

Gigabyte Master

Joined: Mar 28, 2013

Answers

3400

Questions

Helped

1048571

Points

10330

Oc failure computer.
oc failure boot.
oc failure error.
oc failure bios.
oc pc failure.
oc power failure.
your description don't have so many details.
GOOGLE IT.

4 Related Answers

Lee A.

4472 Answers
Posted on Jun 19, 2008

SOURCE: warranty

contact Gigabyte at www.gigabyte.com and ask them directly. As they do not post it in specifications.
Thanks,
Lee

DRSS..

88 Answers
Posted on Nov 19, 2008

SOURCE: Gigabyte GA-945GM-S2

Hi FRND,

check this link for the drivers which you want....

http://asia.giga-byte.com/FileList/Driver/motherboard_driver_lan_realtek_8111.exe

Enjoy...

Regds,
DRSS...

Jose Ma DM.

540 Answers
Posted on Feb 26, 2011

SOURCE: I have a Gigabyte GA-945GM-S2

You could use and USB keyboard to make these changes, to enter BIOS setup, please follow this steps:

1. When the power is turned on, press the button during the BIOS POST (Power-On Self Test) will
take you to the CMOS SETUP screen
2. Go to Advanced BIOS features.
3. Go to First boot device,

(Use or to select a device, then press to move it up, or to move it down the list. Press
to exit this menu).
4. Press F10 to save your changes.

Hans Pedersen

3606 Answers
Posted on Mar 31, 2013

SOURCE: My Gigabyte GA 945GM S2 Mother Board Staring & Turning Off After Few Seconds. At start time CPU Fan starts with a blinking. Whats the Problem?

Hello here is the gigabyte homepage:

http://www.gigabyte.com/products/product-page.aspx?pid=2331&dl=1#manual

Try to download the manual.

The fault could be the power supply, try to renew that.

Try also to renew the thermal paste, between the cooling element and the cpu, and make sure the fan and the cooling element is clean for dust.

The fault could also be a defect ram module.

Any beep codes ???
Or blue screen ???

Good luck

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Displaying OC after repeated weekly self-test attempt; manually starting generator at gen-set panel immediately after said failures works fine.

Its shutting down on over crank, which is a safety to protect the starter.

Read full answer

Aug 07, 2011 • Kohler 12 kW Emergency Power System -...

0helpful

1answer

My intel d915gav motherboard faulty now, the problem is, when I turn on it, it starts up normally, but the next minute when I shut down it and starts it again, then it does not give display at monitor, and...

Problably the MOBO is burn.

Read full answer

Oct 06, 2010 • Intel D915GAVL Motherboards

0helpful

1answer

My Pc just shut down while i was playing a game. i unplugged my geforce 9600 gt's power and my pc worked again, but without graphics. what is wrong with my graphics card???

The problem that caused the PC to shut off is the GForce graphics card is drawing too much power and the switch mode power supply was overloaded and shut down.
Check the switch mode power supply's wattage, if it is around 300 to 400 watts, it maybe be too low. You most likely need to get a higher wattage switch mode power supply, especially if you added more RAM, disk drives, DVD drives etc. to your PC after the initial purchase of the PC.

Read full answer

Feb 12, 2010 • BFG Technologies NVIDIA GeForce 9600 GT OC...

1helpful

3answers

I have a Kohler 12RESM1 propane generator with oc/uu code

U need to make sure that the relay driving ur auto start stay closed all thru the crank cycle.

Read full answer

Feb 04, 2010 • Kohler 12 kW Emergency Power System -...

0helpful

1answer

Inspiron 6000 starts to boot but then shuts down after only 10 seconds. New Battery, power supply measures ok. Caps lite is on.

Try reseating the RAM memory modules, see if any change.
If no change, remove, battery, Drives, Wireless card and RAM, see if the system will run longer or give an error code. If something changes, add 1 RAM module and try again. If the system runs, then add items back one at a time until you determine the faulty item.
If the system issue doesn't change, odds are a motherboard problem. Motherboard are about $100 on Ebay

Read full answer

Dec 06, 2009 • Dell Inspiron 6000 Notebook

1helpful

1answer

Ibm think pad r32 0196 critical low-battery error will boot up then turns it self of

Fail safe in the battery has engaged. See if the computer will start without the battery, using just the power supply. If you can get it started then put the battery in and see if it will charge or reset the fail safe. Give it about an hour, then shut it completely down and restart it with the battery in. If it won't start at this point, then you will need a new battery. Also change the CMOS battery inside the computer

Change the CMOS battery

Read full answer

Nov 04, 2009 • IBM ThinkPad T20 2647 Notebook

10helpful

1answer

Pioneer oc error 1

it's output power amplifier problem pls check and change ur faulty ic

Read full answer

Oct 17, 2009 • Audio Players & Recorders

0helpful

1answer

Media PC HP 7350n Starts runs for 10 sec or more then powers down

its definately not the motherboard, actually when a ps is about to spoil it starts giving that problem and also, the memory cards are also able to cause this problem too. but first, plz try changing ur ps and see if it works..

Read full answer

Apr 07, 2009 • HP Pavilion a1620n (882780664494) PC...

0helpful

2answers

The computer starts then shuts down.

Try booting up the computer pressing whatever key the Dell needs to boot into BIOS (F10, Delete key, F1...pay attention to the screen) and leave the computer on for about 15min. See if it cuts off then. If it does its more than likely your power supply. If it doesn't then its not hardware related.

Read full answer

Mar 12, 2009 • Computers & Internet

0helpful

2answers

Computer keeps shutting down

Yeah your system is overheating, cheack the fan in the power supply to ensure it is working propperly.

If you have a case fan ensure it is working as well..

If your processor is overheating it can give the same problem

What you can do is take the side panel off the system and put a fan there..(house hold fan like the one you sue to blow cool air across the living room) face the fan in the system and see what happens..

Let me know if it sint working so we can try something else and if it is working then all you need to do is chang your power supply fan, change or add a case fan and change the fan on your processor heatsink

Read full answer

Jan 08, 2008 • Sony VAIO PCV-W20 PC Desktop

Not finding what you are looking for?

View Most Popular

Computers & Internet

Displaying OC after repeated weekly self-test attempt; manually starting generator at gen-set panel immediately after said failures works fine.

Kohler 12 kW Emergency Power System - 12RES-L

232 views

Ask a Question

Usually answered in minutes!

Check Out the Mobile Browsers Report

View all Fixya Reports

Are you a Gigabyte Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

Related Topics:

OC failure after changing power supply