Wavelab 4 won't work on windows 7

HP Photosmart C3180 All-In-One InkJet Printer

If your windows 7 system is set up as 32 bit instead of 64, that's why it doesn't work. according to the logitech website that camera will only work with windows 7 in 64 bit mode...otherwise it won't.

When downloading a printer driver from HP you will need to ensure that you are selecting the correct OS (eg. Windows 7) and the appropriate version (eg. 64 or 32 bit operating system). These drivers are different and using one on the other will not work.
Windows XP drivers also will not work properly in a Windows 7 environment and the majority of Windows XP drivers are 32-Bit.

• You can go to the brand's support page on their website, search your model, and look for it's "drivers". Thats what you need to run it. Once you download and install that, your webcam will work perfectly.
• Please reply if you have any more questions. Good Luck! Please give 4 thumbs up if I helped, I am two votes away to becoming an expert!

This might be due to software compatibility issues with Win 7.

Try running the program in "Windows 7 Compatibility Mode", there are not assurance it will work. Hope it work for you & good luck.

Here are help available at these link below:-
1. http://www.sevenforums.com/tutorials/316-compatibility-mode.html
2. http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows

Hope it helps.

Hi,
You can run xp on a virtual machine (VMware or VirtualBox, e.g.) and your program, inside.
On the other hand, Steinberg released version 6 of WaveLab that is compatible with W7.
Good luck!

Works in my Gateway Netbook running a Win 7 Starter OS, Won't even install on my Dell N5010 running a Win 7 Home premium OS. BUT IT does work in Safe mode on the Dell laptop. Tried compatibility mode. Have no Idea why it won't install.

""When trying to open WaveLab 6 using Windows 7 I get an Unknown TException error message."Don't know if this helps. I'm using Win 10 with Presonus Firestudio as my audio interface. I kept getting the unknown TException when I tried to open Wavelab 6. Solved it by going to device manager and disabling the internal AMD sound card and two "High Definition Audio devices" with mfg shown as Microsoft. Must have been hardware conflict between Presonus and internal sound card.

you have a pci audio card so maybe you can add an extra input device by going to devices panel or press F4 shortcut.
and choose your usb mic.
also you can check your wavelab audio inputs. they must have the same config so if you can record woth your usb mic and your poci card in wave lave you must be able to do so in cubase sx

hope it works