Question about Kenmore 24032\24036 Top Load Washer

1 Answer

70 Series Kenmore Washer Agitates in Heavy Duty regardless of switch selection

I have a 70 Series Heavy Duty Kenmore Washer (Model #: 110.92274100). No matter what load selection I put the switch in, it only agitates in the Heavy Duty mode. So Normal wash = Heavy Duty agitate, Perm Press = Heavy Duty agitate, etc ... Any ideas? Do motors have a transmission gear for gentle, normal, and heavy duty agitating?

Posted by on

  • Tom Zee May 01, 2013

    • blueextc3221, thank you, are you saying the timer/main controller/CCU reference means timer in my case, due to my washer only has a timer and a switch, per the schematic? • Duane Grant, thank you, I checked, it was not between settings. But your confident it is in the switch selector mechanism?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Kenmore Master
  • 6,289 Answers

Yours is a 2 speed motor. Does it spin in 2 different speeds. If so, then it most likely is designed with only to agitate in 1 speed. If it only spins in one speed, then your motor is defective

Posted on Nov 03, 2017

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
daddy1264

Duane Grant

  • 76 Answers

SOURCE: No agitation in the delicate and regular modes.

does you washer have a delicate, or normal speed adjustment switch, if it does make sure its not between setting or it will sound like a machine gun......you may need to replace that switch

Posted on Jan 01, 2009

blueextc3221

blueextc3221

  • 15935 Answers

SOURCE: Kenmore 90 Series only agitates on heavy-duty cycle

It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a top loading Kenmore Washing Machine. I don´t have the excat model but looks like a KENMORE HEAVY DUTY SERIES 70 AUTOMATIC WASHER, MODEL # 110.92273100. The problem presents after finishing...


You may have 2 defective parts.
First,make sure the hot and cold water hoses are connected correctly and both turned on.
If the water fill problem is the same,the water temp switch is bad.
The not filling after the wash cycle could be a bad lid switch.
Set the machine for SPIN and turn it on.
If it does not spin,replace the lid switch.

Sep 20, 2010 | Kenmore 24042 Top Load Washer

1 Answer

Kenmore Heavy Duty Series 70 washing machine gets stuck in cycle.


Either your timing motor has broken or the gears that it drives are stripped. The timing motor is easy to replace but if the gears are stripped you will need a whole new dial assembly.

May 09, 2017 | Kenmore Washing Machines

1 Answer

Kenmore heavy duty 70 series model 110-8237012


probably your drain pump leaking it has a seal right where it attaches to motor,,,,mine is leaking there but haven't replaced it yet! lol

Feb 27, 2010 | Kenmore Washing Machines

1 Answer

Kenmore Heavy Duty 70 Series Leaking in the back


If you bought a new washer and you still have a leak, i guess it was not the washer but where it drains into. Sink or stand pipe has a leak. unless you are useing the old drain hose from your old washer. Dry up everything and look for the sorse of water with a bright light when the washer drains .

Nov 22, 2009 | Washing Machines

2 Answers

I have an old Kenmore Heavy Duty 70 series washer.


its a filter inside the water hose thats still blocked or the relay inside the washer for the cold feed is not opening up fully it could just need a clean or maybe a new one fitted

Nov 05, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore 70 series 110 washer won't drain or spin, but agitates


You have a broken lid switch. Check to see if the switch is broken off of the two screws that hold it under the lid. If it is, get a new one, take off the case and replace old switch with the new one.

Apr 06, 2009 | Kenmore 24932 Top Load Washer

1 Answer

Kenmore 82372110 70 series heavy duty plus won't spin


If it drains and won't spin you have to replace the direct drive coupling.

Feb 25, 2009 | Kenmore Washing Machines

1 Answer

Slow cold water only fill kenmore heavy duty 70 902202


remove fill hoses and inspected for debris or cloggs ,,,,

Dec 30, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore 70 series Agitation and Spin Cycyle clicking


Sounds like you have a broken motor coupler. Not expensive. #13 on the diagram. Part # 285753, dave www.washermd.com

5177aef.png

Dec 12, 2008 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...