Clock set instructions for Sanyo stereo awm2800U

the remote does not care what time it is. The AC unit has all the unit control's and info on it. Just like a tv remote the tv has all the info on it.

There are several onn mini stereo systems. Suggest you google onn stereo mini system, as there are several user manuals available. Select the one for your model & look for clock instructions

• Use the actual stereo to set the clock, not the remote.

1. Turn off the stereo.
2. Press "clock/timer" for at least 2 seconds.
3. Press "memory" to make the hours blink.
4. Turn the volume knob to adjust the hours.
5. Press "memory" to make the minutes blink.
6. Turn the volume knob to adjust the minutes.
7. Press memory.
8. Now the clock setting is complete.

Regards, Tony

This is taken from the user manual.
If switched on, press the ON button to turn the unit off.
Press the CLOCK/TIMER button for at least 2 seconds so that the clock icon blinks on the display.
Press the MEMORY button. The hours display blinks.
Turn the VOULUME control to set the hours.
Press the MEMORY button. The minutes display blinks.
Turn the VOULUME control to set the minutes.
Press the MEMORY button. The clock starts.
NOTE: the time can be set accurately by pressing the MEMORY button when a time signal is heard.

Changing the clock to 12 hour display.
If switched on, press the ON button to turn the unit off.
When the clock is display, press the MEMORY button and hold it, then press TUN UP buttom (this will change from 24hr format to AM/PM format)

Clock setting:
Press and hold SEL until menu appears
Using the scan button (FWD/REV), select Clock H
Using the volume knob, set the value
Using the scan button (FWD/REV), select Clock M
Using the volume knob, set the value
Press SEL to save and exit

Settings are on page 6- of the instruction book. Did you loose the book? If so, you can download one from books.jvc.com.

1. Power the unit off (See instruction manual page 11, "Power ON/OFF") - Crucial missing instruction.
2. Use MULTI-CONTROL to select CLOCK SET. 3. Press MULTI_CONTROL to display the setting mode. 4. Press MULTI-CONTROL to select the segment of the clock display you wish to set. 5. Turn MULTI-CONTROL to put a clock right

This is the generic instructions to set the clock. I have visited the sanyo site to aquire a owners manual with no success in locating one. This being said, here are the instructions.

1. Unplug the unit for a minute then plug unit in.
2. Press the clock (clock/timer) button once.
3. Using the keypad, input the time you wish to set.
4. Press the clock (clock/timer) button once.
5. Press the stop/clear button, Time should remain.

Hope this works, if not, let me know.

Please take the time to give this solution a fix ya rating.

clarkco

when it in off mode try hitting att buuton usally adjust it wile its off ok

For the JVC KD-G200 look here for instructions on how to set the clock...

http://www.fixya.com/support/p187738-jvc_kd_g200_cd_player/manual-17158/page-9

You can request the manual in PDF form here: http://www.sanyo.com.au/aim.aspx