I cleaned my he2 plus washer from kenmore and it stopped before it was completed and is now flashing f-26 and will not run. What does this code mean?
F-26, is a door lock switch error code. Some things to try; Unplug the washer for 1 minute and see if the error clears. If not, try entering the diag mode by pressing any key except pause/ cancel. Press for 4 seconds and release for 4 seconds 4 times. If entered correctly, all lights should light and the first error should appear. Press the same key to advance through all the errors. When the errors finish. It will start an automatic test mode that tests all componets. The first thing it will test is the door lock. If this fails you more than likley have a door switch problem. Let me know how you make out. Catriver
Guys,
I have tried the My Cycle, 2nd Rinse and Start buttons and can not get it into diagnostic mode. We have an F 26 error on our Kenmore HE2 washer. Any suggestions?
Thank you for this post, Mr. Marek. This solved our immediate problem of not being able to open the door on our Whirlpool duet ht machine.
We'll the F-26 error code has returned. Put it into diagnostic mode, but that didn't fix it this time. Should I go ahead and order a replacement Latch:http://www.searspartsdirect.com/partsdir...
×
Hello & Welcome to FixYa
F21 error is displayed when the washer is unable
to drain, press PAUSE/CANCEL button twice to clear the display. After this
please check the drain hose and drain pump filter for any blockages and make
sure it is not clogged with foreign particles. You can also check the drain
pump to verify that its working. Please get back to me if you have any other
questions.
Kevin
1,276 views
Usually answered in minutes!
Guru, You fixed my problem and I think you like nothing doing. It went through the diagnostics and it cleared and is now working. My appreciation for the assistance.
×