I turned on my dryer today & it started working like normal but several minutes later I went in & it had stopped. There are no lights on and appears to not be getting any power. I have checked all breakers & unplugged it without any luck. Any other ideas of how to fix it?
Gain access to the inside and the wiring of the machine.
First, check the wires with a meter and see if electricity is even getting to the 3 or 4 wire "buss bar" where the electric cord attaches from the wall to inside the machine.
If all that tests OK, then take an ohm-meter or a multi-meter and begin testing each of the "fire-protection" circuits.
You may find as many as 6 thermal switches, and as many as 3 fuses.
Unplug each one you test, and test it with the ohm-meter for continuity.
The one that shows no continuity is your problem.
God bless your efforts.
Might be thermal fuse.
SOURCE: Dryer starts then stops after a few seconds.
thank you ill get back to you after reading the tech manual shortly
SOURCE: NO POWER TO DRYER???
Hi there, you are experiencing a power supply board failure. this board may have used all its life up and unfortunately, it will have to be rebuilt or replaced.
SOURCE: no power to maytag duet
most maytag "performa" dryers with no power h appen froma blown thermal fuse. It is located under the top and beside the heating element. you can take an ohm meter to both terminals.If you do not get a reading, the part is bad. It comes as a kit with a new safety tstat
SOURCE: Maytag dishwasher, no power, then flashing lights, now no power.
Had the same problem, removed the kick panel to find a set of instructions under the insulation, had to push a sequence of the panel buttons, its been running great for a couple of weeks now!
Jeff
SOURCE: Hello, today our dryer won't run. The control
if nothing works,belt may be broken, cutting of power via safety switch. check belt
233 views
Usually answered in minutes!
×