Sharp AR-275 copier with fax module. Need to edit sender ID

You can download the manual from this site:

http://www.usersmanualguide.com/sharp/copier___mfp/ar-235_275

Hi click here for the manual from the official Sharp USA website - http://files.sharpusa.com/Downloads/ForBusiness/DocumentSystems/MFPsPrinters/Manuals/cop_man_ar235_75.pdf

In AR 275 Sharp copier U2 40 is very common problem

go menu.fax ,option setting and change transaction list to none

Depending on the interface option set up in your copier, you will either access the printing setup options via the Custom Settings option, then enter the Key Operator access code to view the expanded menu or you can press the 'Copy' button to the left of the LCD screen and look for Main Menu options, then make sure you've enabled TCP/IP (You may have to reset the copier in order to enable it). You should be able to enter the IP address manually.

press printer button >special key then you can browse through arrow button check there you can see how to change IP address

Hello sir; there have no reset key for maintenence, whenevere PM light on you need to do PM service (such as replace drum developer, drum blade etc.)

In AR 275 Sharp copier U2 40 is very common problem, U have to only reset the above error code as fallows

press # then intrrupt then c them intrrupt then display will show simulation mode then enter 16 then press ok key

pl ask for any difficulty

look in the fax manual there should be a section on that
If you have no manual call the company where the fax machine was mad.

what is you OS? check you printer drivers. are they properly installed?, what is your connection between your PC to your printer?, AR 275 can be connected thru network, parallel port, and a USB... they have different printer drivers