C200 bizhub error code c 2552 - Konica Minolta bizhub C250 All-In-One Laser Printer

https://www.manualslib.com/manual/973047/Konica-Minolta-Bizhub-C200.html?page=389
https://youtu.be/AXDRVullvEY

This site says laser failure but describes 3 remedies:
Error Codes Konica Minolta bizhub C200 Code C4552
Error Codes Konica Minolta bizhub C200 Code C4552
http://www.printcopy.info/?l=en&mod=free&chap=erc&brand=Konica-Minolta&model=bizhub%20C200&code=C4552

replace the black image unit using 3rd party toner? if so replace with OEM and USE OEM image units

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

no such code for a c200

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

contact service use go to www.konicaminolta.com

You will need to replace the thermostat and the best solution is to ask a technician to do that.

You will need to replace the thermostat and the best solution is to call a technician.

Hi, C-2552 on the bizhub C250 means the sensor that measures the Cyan toner level has detected it as abnormally high.
It's likely to be the Cyan Imaging Unit has failed. But try this first..
Remove the Cyan Imaging Unit, give it a gentle tilt (45 degrees or so). Tilt it backwards and forwards a few times, then refit.
Hopefully the code will be gone.
If not, it sounds like the Cyan Imaging Unit is faulty.

Regards

Tam

Pull out the trays, locate the metal tab on the copier frame that is held in with one screw. Remove the screw and angle the tray out.