Keyless for a ford freestar 2004 i replace the batery in the remote control and now the remote not work

• HOW TO - Change the battery and quick fix your car remote ...

  ? 9:32
  https://www.youtube.com/watch?v=KzCXGXCe0oc
  Sep 1, 2011 - Uploaded by tyreeztt
  Also if your remote isn't working with a new battery please check out this ... TO - Change the battery and quick fix your car remote / keyless entry ...

  Remote Key does not lock / unlock doors after battery change ...

  www.6speedonline.com/.../208274-remote-key-does-not-lock-unlock-do...
  Apr 17, 2010 - After I changed the battery, it would no longer lock / unlock the doors. ... I can start the call and all .. its just the door and trunk lock / unlock function that does not seem to work . ... now your fob is learned... the keyless entry goes into a "sleep" mode to preserve the batt.. if u do not use the ... Still don't work .

  how do i reprogram my lock remote to my car? i changed my ...

  www.cargurus.com > Questions > Hyundai > Tiburon
  
  CarGurusAug 17, 2009 - i change my battery an now my lock an un lock buttons dont work on my remote how o i reprogram it? ... I have a Hyundai 2003 Tiburon, and the followingworked for me, get ... However for a replacement keyless remote fob, you will have to go to ... And no, they don't do it for free (ranges from $30-$50 in my ...

  Top 5 Tips in Fixing a Keyless Remote ' eBay

  www.ebay.com > ... > Safety & Security > Keyless Entry Remote / Fob
  Key fobs that don't permit entry can be a major hassle for drivers, but fortunately, there... Drivers with a bit of basic electronics experience are often able to replace their ...After confirming that a remote is faulty, try replacing its battery. ... like "Jeep Wranglerkeyless remote," to find listings that will work with specific vehicles.

get the codes pulled

Hello, I want to try to help you on this problem. The Limited models of the product line have extra "Bells and Whistles" added to the normal dash functions. You have a dash display Computer which shows a Menu for the extra features. On this Menu, you can set the "Back-up" alert system to be On or Off.

Sometimes when an Oil Change is done, the Technicians have to Reset the Oil Change counter. They use this Menu and could easily have changed the settings for the Back-up and the Remote control functions. You need to get into the Menu and see if this is the case.

For added measure if the Menu does not help, look under the Drivers' dash at switch on the Brake pedal(gets bumped), the switch for the Transmission selector is more difficult to see. Test to see If the Back-up sensors work in Neutral and not Reverse, the shift cable will need to be adjusted. That's about all you can do yourself.

Sometimes the "Brain" in the door handle will die and you will need a new part. I hope my solution is very helpful to you.

Tells you in the owners manual.

Don't have one? (Helm.com) Buy one.

open the remote and spray off the electronics with tuner cleaner from radio shack and leave open over night. reassemble the next day and see if it works. you may need to reset the car to it by following the instructions in the manual. very easy though

I have a 2004 ford freestar and it's missing a lot I changed the spark plugs and fuel filter. what else can I do ?

POWER SLIDING REAR DOOR WON'T OPEN ON A 2004 FORD FREESTAR WHEN THE BUTTON IS PUSH EITHER ON REMOTE OR CONSOLE. ONE DOOR DOES WORK.

The code is on the fuse box under the dash near the hood release. On my van there are two bar codes on a sticker attached to the fuse box. Under the first bar code, on the right side is the 5 digit code (bring your glasses the numbers are really small). After you get this code, just search the internet and there are plenty of forums on programing the keyless remote and also adding your own unique number to the key pad entry.

Good Luck

the most common cause of this in your Ford based on my dealer related repairs would be a part called the rotating ribbon contact (Ford refers to this part as the Clock-Spring contact.) that connects the steering wheel airbag to the steering column wiring, this contact coils and uncoils as the wheel is turned left and right and makes a solid connection to all steering wheel mounted components and controls. To change this part you must dis-arm the airbag and remove the steering wheel, if u do this repair yourself it is very important that u dis-arm the SRS system before starting work, this can be done by disconnecting the battery for 1 hour.