The washer will fill with water but won't go into wash cycle...emptied washer and spin cycle makes a humming noise
It will fill but won,t spin, will throw out water as if it washed, then it take water to rinse but won,t spin ,then will throw out water as if it did , but clothes are soaked
My washer, frigidaire stops at the spin dry cycle. Even after manually turning the timer the spin dry or pump wont work. Spinning back to the normal wash cycle it works. Checked the pump directly connecting the leads in 220 volt and it works fine. Possibly, I doubt the timer problem. But at the spin cycle the time clicks and stops. Maybe the timer motor doesnt respond at the spin cycle. I tried opening the timer and found the cam inside is okay. Am not sure if the cam has worn out cud be the reason the cam track work out. Any suggestion please help how to check the timer circuit continuity.
SOURCE: washer makes a loud noise
Hi As per your description
it sounds like the motor drive coupler has failed. If the drive coupler fails
you will hear the motor running but nothing will happen except water will pump
out. Tilt the front of the washer up a couple of inches & look on the floor
for rubber shavings or broken plastic pieces, this will be a sign that the
drive coupler has failed. If the motor is seized up I recommend checking the
pump. If something is lodged in the pump the motor will just hum. Other
possibilities; motor, timer, transmission or harness problems. So tilt the
washer to the back and look closely to the motor, the coupling from motor to
trans may be broken. The motor drives the agitator, using a belt or a drive
shaft. It is possible that the drive belt is broken too. http://www.washerhelp.co.uk/diy-repair-help_2.html#cl_q4 Please get back to us if
you have further query else please accept this particular suggestion. Thanks for contacting
fixya.com
Please check this link bellow for more information which will help you
troubleshoot your problem:-
Hi
If the cycle won't complete then either it's a problem with the timer or a cold-water supply problem:-
If your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.
It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water.
Please check the link to get some more idea:-
http://www.washerhelp.co.uk/diy-repair-help_8.html
Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com
3,933 views
Usually answered in minutes!
washer will fill but wash cycle does not work
×