Putting the bobbin housing back together

Manuals Library (manualslib) is the best site for manuals by a country mile. I just opened this one in less than a second. the website www.manuals.is has it, but it is not a good viewing format.

SINGER 5705 INSTRUCTION BOOK Pdf Download

ManualsLib https://www.manualslib.com > ... > 5705
View and Download Singer 5705 instruction book online. 5705 sewing machine pdf manual download.

Support

Singer https://www.singer.com > support
Singer Sewing Support. Find Manuals, Accessories, How-To videos, Troubleshooting Tips, Software Support and FAQ's.

‎Singer Model Number 1990 to... · ‎How to Find a Model Number... · ‎Sewing Help

..Videos that _MAY_ help?

Those parts are meant to be removable for cleaning and oiling.

How to pull apart and reassemble the bobbin case area on front loading...

How to Clean and Maintain your Sewing Machine at Home Front Loading Bobbin

This video is about removing the items in the bobbin area to clear thread tangles, but the instructions may help you figure out how to put them back together.

30 Removing Tangled Thread from the Hook Race FREE

...

go on line to asked.com they sometimes have videos on how to's there

I think you're talking about the shuttle and race. It goes together like this: http://www.manualslib.com/manual/85659/Kenmore-385-15208.html?page=68

what is the name and model number of the machine ?
do you have a manual?

You should have 3 pieces that make up the parts of the hook and bobbin case that you can take out to clean. 1 the bobbin case, 2 the race ring, 3 the hook. The easiest way to reinstall the hook and race ring is to tilt the machine and lay it on it's back. If you have the bobbin door open, and you rotate the handwheel and look inside the hook area, you will see the driver rotating back and forth. You want to set the hook inside the hook housing facing opposite the driver. As if your putting two halves together. Next install the race ring, shinny side out. Most of the rings have a nipple at the bottom that fits into a slot in the hook housing. Next lock the race ring in place with the 2 black or chrome arms that you swing inward. All you do next is install the bobbin case. Your done.

I have the same problem!!! Trying to figure itmout. I KNOW I put it back properly! What the heck? HELP!

The plastic bobbin case should sit on top of the raceway, it should slot in quite easily, once the bobbin case is in put the small metal clip at the top over to hold it in place.

most likely the bobbin case is not aligned correctly .Insert the bobbin case so that the projection on the boobin case aligns with the spring.