ASUS p5kc front panel connector

any manual will be at SONY, this mobo is a contract made.
Asus, to sony, and made to SONY SPEC.
one poster said
from my SONY vaio pcv-rs346. (and is)
no service manuals sorry or gee ask SONY.
what you do is plug in the front panel connector.
it is keyed
but you lost the front panel assembly didn't you.?
why play P4 relics, 99% are in the landfill.

it is possible that asus used there standard(internal) wiring
here and only changed like 3 times in 20 years.
2003 made PC, it is, a true fossil.
or ask the bad boy that sold it to you.
did you also lose the sony VAIO PC casing?
sorry i can't see it to know know what's UP DOC.


here it is sold just like this, rs346
the panel has 6 , cables and are not documented
they simply plug in. (lost this did you? ) use the word lost or?


this is the real part, had to search very old sales transactions.
but there it is in all its relic glory. worth exactly zero.$

http://www.asus.com/Motherboards/P5KC/

Hello there,


Below is an image of *********** Board with number indication and wiring explanation. From your manual page 1-6 you can see the image below and 1-7 for the connector, jumpers, slots. as indicated in your problem I will only answer problems related to the wirings.

• For the Front Panel

1. There are 8 wires from the front panel's casing, excluding USB connectors and front audio cable.

2. Just plug the front panel switch headers to the F_Panel main board connectors. 1 & 2 are positive, if the led do not light change polarity but Im sure it will.

Note:The mainboard provides a front panel connector for electrical connection to the front panel switches and LEDs. JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide.

• For the USB connectors

1. If your casing has a USB header on the front bezel you can put it on any connector. You can also purchase a USB module cable or an internal card reader and plug the headers to any of those connectors.


Note: Observe Polarity, do this Vcc, -Data, +Data, Gnd ,(NC) ground is always near to NC.

Plug it at your own risk, reference image are already shown.

• Front Panel Audio connectors

1. Look for FP_Audio header from your casing and plug it to the connector.

*Asus recommend you connect a high definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability.



Hopefully this information helps.


Thank you for using FixYa.

Below is a link to Asus Support for your motherboard. Under the manual section, there are both user manuals and installation guides you can downlload. Look for the installation guide in mutlilanguages., It is in about the middle of the instatllation guide list.

http://support.asus.com/download/Download.aspx?SLanguage=en-us

I hope that this will solve you issue. If so, please remember to leave postive feedback. If you have any more questions, please let me know.

Brian

you connect your front panel cables to to the motherboards front panel connectors to activate the front panel audio.

for more reference you can download your motherboard manual in Asus website below

http://support.asus.com/download/download.aspx

https://www.manualslib.com/manual/444313/Asus-P4p800-Mx.html?page=38#manual

Page 38 is the front panel 20 pin connectors; if you have a 10 pin, you don't have that model. I would search the manual I linked to for the motherboard picture so you can determine what the 10 pin really is.

Hi,

You can get the intsallation guide from Asus themselves.

Click in the link below or copy and paste it into the address bar of your browser. When the page loads click on manuals and select the Multilanguages guide to download it to your computer.

Link below >>>>





http://support.asus.com/download/download_item_dna.aspx?product=1&model=P5GC-MX/1333&f_type=12&SLanguage=en-us&os=17#f_type_12





Regards.

asus web site download manual for a p5pe-vm thats all you need

The manual is Here:
http://dlcdnet.asus.com/pub/ASUS/mb/socka/nforce2/a7n8x-e/e1876_a7n8x-e_deluxe.pdf

However, wires to the case are specified by the case maker (you did not specify). Just about all of them mark the connectors on the wire ends with their functions. Just match with the manual's jumper description.

You can download the complete user manual in English from the manufacturer's website at this link:)

http://support.asus.com/download/download_item_4.aspx?product=1&model=P4B533&SLanguage=en-us&os=17

The front panel connector pinout is on page 2-33, or page 59 in the PDF file. You should have mor ethan enough information to make all the connections you need.