Remote control not working dtr t 1000 humax freeview box

Have you tried pointing the remote at a digital camera? This will show the infra-red signal coming from the remote. If the remote is OK, it may have been set to an alternative mode.

See: https://hummy.tv/forum/threads/using-more-than-1-humax-box-in-the-same-room.24/

Get a new one.

Google search with shopping resulted with: https://www.google.com/search?q=HUMAX+REMOTE+RM109U+FREEVIEW&oq=HUMAX+REMOTE+RM109U+FREEVIEW&aqs=chrome..69i57&sourceid=chrome&es_sm=122&ie=UTF-8#q=HUMAX+REMOTE+RM109U+FREEVIEW&tbm=shop

There's a Humax YouView user guide here:
http://myhumax.org/wiki/images/2/21/Youview_user_guide.pdf

I had this problem, perhaps after pressing some keys on the remote control wrongly.

I turned off the TV at the mains. I turned off the PVR at the mains.
I turned both the TV and the PVR back on, and both worked correctly.

There is no setup codes for humax with this remote control.

Select the AV input manually via the TV remote. The scart lead may not be switching the TV automatically (if you have two scarts on the Freeview box, then try the other scart socket).

You can download Onkyo universal remote codes with instructions here.

I hope that helps.

Hi,

I have one of these boxes and one of the things which has caught me out a couple of times is that the remote can control three devices. To turn the Z250 on and off you may need to press the DTR button at the top of the remote first. When you press the on/off button on the remote the DTR button should light up red to let you know the signal is being sent to the Z250.

You are probably aware of this but just in case you weren't

Same problem with Channel 71 CBeebies. Tried rescanning which worked initially for a few weeks but it's back and rescanning does not fix the problem now.