Sandisk Sanza e200 seires display is blue

It is not cost effective to fix an mp3 player like that. Here is a model that should be built a bit better.

http://www.bestbuy.com/site/searchpage.jsp?st=sanza+mp3+http://www.bestbuy.com/site/sandisk-clip-sport-8gb-mp3-player-black/3761028.p?id=1219093519912&skuId=3761028 http://www.bestbuy.com/site/searchpage.jsp?st=sanza+mp3+http://www.bestbuy.com/site/sandisk-clip-sport-8gb-mp3-player-black/3761028.p?id=1219093519912&skuId=3761028

Itunes is what is known as proprietary software.
Which basically means that it only works with hardware of the same brand. (Apple- Ipod)
You will not be able Itunes to load mp3 files on a Sansa MP3 player.

You can download the manual from the manufacturer's web site at http://mp3support.sandisk.com/sansa/UserManual/FUZE/fuze_userguide_en.pdf

Press and hold for 20 seconds the ON and PLAY (>||) buttons at the same time.

Go onto the Sansa site and find your product. Then try and see what downloads they offer for the player such as installation software or newer drivers.

Try going to the SanDisk website and download the drivers and run the install from their site. Then you don't need the small CD disc.

Here is Sandisk's Support website that has the manual for the Sansa Fuze 2gb.

http://www.sansa.com/sites/default/files/downloads/FUZE_UM_0608_ENG.pdf

Hope this helps you out!
Have a nice day!

- Neal

check to make sure you meet the requirements. You need Windows Xp with service pack 2 and windows media player 10 or above.

Try re-installing the drivers for the MP3 player FIRST then plug in the MP3 player! Also make sure you have the lates Windows media Player installed

same thing happen to me! I did a hard reset (hold the power button for 10-15 sec) waited a few seconds, then tried to turn it on -- it worked for me. good luck!