I have a panasonic microwave oven that continues to rotate the plate and fan when the door is open. I know magnetometer is not switching on since I place a cup of cold water just to see if it would heat it up and it does not heat up the water. Has anybody run into this?
Yep going through the same thing myself. I found that the OMRON switch V-16G-3C25-M is bad and now I'm trying to find one. I contacter OMRON but they said the switch can only be orded from panasonic so I'm going that route myself. If I have any luck I will write back.
If display ( : ) after 3 sec replace converter bord and if display ( ; ) after 23 replace magnetron
501 views
Usually answered in minutes!
×