The piece that you need is referred to as the coupler. The coupler is a breakway part that is designed to shear and/or wear down in the event that the blender is overloaded. This is to avoid damage to the motor.
The coupler may be purchased individually and is an easy repair that can be done at home. You may purchase the part and access step-by-step replacement instructions at the following link:
http://www.mendingshed.com/kacoupling.html
Coupler part# 9704230; instructions included. keep in mind it's reverse-threaded. no dissassembly of blender required also.
Older KitchenAid blenders had a jar that was
made so the blade assembly could be removed for cleaning. On the newer models
the blender jar and the blade assembly are all one unit so you have to purchase
a new jar to get the blade assembly. All of this is dependent on which
model of blender you have.
We would be happy to help you. Please a give us
a call at 1-800-339-9297 we would be happy to help! One of our repair
technicians can talk you through the repair over the phone free of charge. On
the bottom of your blender is the model and serial numbers; have these handy
when you call so we can help you order the correct part.
We have several blender jars on our Web site http://www.mendingshed.com/kitaidblen.html for KitchenAid blenders. If we don't have the blender
jar that fits your model in-stock we can order it and ship it to you. Please
contact us with any further questions. You can also email your model number or
questions to [email protected]
Sincerely,
Mendingshed.com Staff
1,074 views
Usually answered in minutes!
×