RCA remote doesn't work. It worked until I tried programming with a Direct TV remote. I couldn't get the Direct TV remote to work (none of the codes worked) and then the RCA remote quit working also. The remote flashes (it has new batteries) but the TV doesn't respond for anything including the power button.
\its most likely the ir sensor which has the issue. I will need the model number of your set to help you further on the issue. You can reply to this same post for further assistance if needed.
Model Number is 32LA30RQ. 32" LCD RCA flat screen tv.
i would suspect the IR sensor you should be able to get one by send a email request to [email protected] include your model number and symptoms they respond quickly.
×
SOURCE: remote control
The correct model number is iLO2600.. That remote is available at http://www.remotes.com CHEAP!!
SOURCE: Direct TV remote does not control TV on/off or volume.
I have the same setup like you. Direct TV and Emerson LCD TV. The Direct TV remote stores a limited amount of codes and none worked on my TV. Sadly it's not something you can update. They seem to only stick with the popular codes. Welcome to the "head of the curve" like me. lol
SOURCE: cant program direct tv remote with my new sylvania lc320slx
The remote is only programmed with only so many codes. Sadly, It doesn't hold all code for every TV made.
But you can try making the remote search every code stored inside to see if one of them will work.
Here are the instructions form the DIRECTV web site:
You may still find a setup code that works for your device by stepping through the library codes in your remote. The following instructions will help you do this.
StepNSet
SOURCE: Mintek TV and Direct TV remote wont program
Try a code search, the method should be in the manual. If you can't get that to work then it's not possible to use the DirecTV remote.
If that's the case then get a learning remote.
159 views
Usually answered in minutes!
×