I need to replace the high voltage board on the refrigerator as the lights on the door are continually flashing and the ice maker chute constantly flaps open and closed. Where is the high voltage board located and how do I replace it?
I had the exact same problem so HERE IS THE REAL SOLUTION: The first post by schwab is only HALF CORRECT. After the board is replaced it has to be programmed from the front digital display board key "+ and - keys" There is a code on the inside of the fridge that needs to be entered using the keypad on the front for temp adjustment etc and a specific sequence to set the program. If not done properly your fridge will not work but will look like it is. Call Maytag for FREE REPLACEMENT. They did mine. FG-Systems Engineer-I watched very closely what they did.
See the post on Samurai Appliance Repair Man's site http://applianceguru.com/forum1/13035-1.html for instructions on how it's possible to fix the HV Controller Board power supply filter caps for $5 in Radio Shack parts (really!). You need to be able to solder electronic components, or know someone who can. There are 2 power supply filter caps that appear to go bad and the result is the blinking and flapping. I had the same problem and decided I could not wait for a $150 replacement back-ordered board.
681 views
Usually answered in minutes!
Not making ice
i have tried unplugging it and check all the doors
×