I came home yesterday and noticed my wine refridgerator had a code in place of the temperature readout. The code was E3 and as I played with it also E4 came up. The temp on the lower portion read 75 degrees, and wasn't cooling. I pulled it out and didn't see any issues. Didn't see any reset button, unplugged it overnight, and had the same error this morning when i replugged it in. Any thoughts or advice?
E4 on danby designer wine cooler -
TEST your compressor: Cooler can be forced to operate and cool as a test.
Unplug unit from 115v receptacle.
Hold both temperature control buttons down.
Plug unit in 115v receptacle.
The cooler should start, but the thermostat will not stop the compressor. Now you got a freezer ! I do not know how to fix the E4 error yet.
All of E1, E3, E4, E7 come from faulty thermocouple. You need to take it apart and replace it.
Is the compressor running? I don't know this unit, but know that if you are too warm that is the first thing to check. In reading about another unit that had a different problem, it was mentioned that there is a ciruit board. If it has relays on it then these are the most likely culprit. They are either not making contact or staying in contact too long... sometimes just tapping each relay usually a black plastic component will cause it to work intermittently..Not sure if you can get these but call the company help line at 1-800-263-2629.
6,320 views
Usually answered in minutes!
We have the same error message, but the machine is over cooling.
just got the same problem -- tried unplugging but to no avail. Lower temp gauge says E4.
I justed noticed the same issue but the upper has the E4 and the lower is 73.
message is E4 and 69 not cooling at all. We tried changing temp adjustments but no change.
I have the identical problem. I have the E4 error message.
I have the same problem: E4 on the lower chamber. The fans and lights work. The compressor only works when I bypass the electronic board.
I have the same problem
Same thing, E4 Code. bought a new temp sensor as the customer service rep said (20 minutes on hold) - $22 to my door - removed old one, put in new one, and vola - Nothing, still E4.....I tried swapping temp sensors too and nothing changes, so I guess its the Board or something.
E4....Same as the above. My question is why can't we get an answer from the compay??????????? Talking to ech other is not solving the issue, is it?
Sadly this is ridiculous . . but I just opened the fridge for a bottle of wine and everything is warm. . the bottom has error E4.
yualfred .... if you would describe how to get to the part , and , what it looks like , you would have a great solution .
×