SOURCE: Kenmore Side by Side Model 253-56953601
does it have a lockout on the despenser area that you can push to reactivate the despenser
SOURCE: kenmore model #106 55522400
YOUR PROBLEM COULD BE WITH YOUR INTERNAL ICE MAKER HEATER ELEMENT OR THE INTERNAL MOTOR OF THE ICE MAKER NOT OPERATING WELL.BEST YOU GET A EXPERT TO ATTEND TO THAT AS IT IS A COMPLICATED COMPONENT TO WORK WITH.GOOD LUCK
SOURCE: Ice maker not getting water
Hi, The first thing to check is the inlet tube going through the back wall. Make sure it isn't plugged with ice. If the inlet is open, you can remove the front cover on the ice maker and locate the to holes marked M an N. Use an insulated wire and strip off about 1" on the ends. Insert the wire ends into these hole and see if the white gear on the ice maker head starts to turn. Let it advance through the cycle and see if you can hear the inlet valve hum when calling fpr water. If water enters the icemaker, you will need to replace the head modual board or the whole ice maker. There is not much difference in cast.
I hope this helps you. Please let me know if I can assist you further.
Vic
Hey friend, thanks for your post!
I understand that your Frigidaire refrigerator is not dispensing ice. I would check to make sure there is no buildup of ice on the inside of the freezer door to prevent any additional ice being dispensed. When you push on the dispenser lever do you hear anything inside of the ice bucket? If you do not hear noises when the dispenser is pushed I would check your ice bucket to assure that it is installed correctly.
If you continue to experience these problems I would suggest contacting a professional to come out and properly diagnose your appliance. Hopefully this is helpful. -Matt
254 views
Usually answered in minutes!
×