Question about New Balance 1400 Treadmill

1 Answer

My Reebok v6.80 treadmill turns and lights up but won't go.

Took the hood part off and the incline motor works and moves but it's not moving the belt to make the treadmill move. Belt is on and can manually move

Posted by on

Ad

1 Answer

ernesto cuadra

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
    Superstar:

    An expert that got 20 achievements.
    All-Star:

    An expert that got 10 achievements.

  • New Balance Master
  • 12,223 Answers

1) LUBE the deck belt,you have a WORN deck belt, this happen because you didnot lube according with the schedule maintenance
29 LUBE the rollers bearing too
3) Test the drive belt motor, for worn or crack, or adjust if is possible
4) Test the input voltage motor, if there are the motor need repair
5) Test the output voltage board, for input voltage motor, if there are NOT the board is faulty.
God bless you

My Reebok v6.80 treadmill turns and lights up but - 11_28_2012_3_51_17_pm.gif11_28_2012_3_51_56_pm.gif

Posted on Nov 28, 2012

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Ad

sathababu

  • 4 Answers

SOURCE: Our New Balance 1400 treadmill starts to slow

Please check wheel setting ( When calipration)

sada

Posted on Jul 13, 2009

Anonymous

  • 64 Answers

SOURCE: Life Fitness T3 treadmill won't turn on. Power

Could be. If you had to take it apart, I would definately check the wire harness connection. Also if there are bolts that were removed, check to make sure none of those pinched the harness when reassembling.

Posted on Nov 17, 2009

JIm Shipley

  • 218 Answers

SOURCE: treadmill turns off when increasing incline. New Balance 2500

there is a short in the incline the motor is bad

Posted on Aug 11, 2010

Testimonial: "I agree. The problem is that it requires servicing. My (cheap) fix is just to use it without changing incline! "

roadtech7

Matt Olenzek

  • 297 Answers

SOURCE: my new balance 1500 treadmill

It sounds like you have a bearing failing, either in the front roller or the motor. If it is the front roller it will be a dull "Clicking" noise, if its the drive motor it will be a growl noise. The growl will be so loud at top speed you wont be able to even talk over the noise. Remove the motor hood and this will help you determine the culprit.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/matt_8dbc24bf722649ac

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Nov 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My trimline 2200 treadmill will not start the belt. I started having problems where it only worked on very slow speed now the belt won't turn at all. I tried pushing the circuit breaker reset
Likely your motor wore out, or that the circuit for the motor driver is shot. If the panel is starting it is likely that the motor is not getting any power at all.

Jan 21, 2015 | Exercise & Fitness

1 Answer

Incline works, belt not moving
You can check if your motor works but putting a 35A rectifier bridge at a 110VAC power source and connect the motor. Motors are usually 180VDC. So if it moves, it's OK. If it does, you should also place your hand on it to see if the operation is smooth. 21ccd37b-fec8-406d-bd2f-a1ea7fd624fa.png

Jan 19, 2014 | Image 10.0 Treadmill Walking Deck

1 Answer

Acd3 treadmill belt wont move
hi There.
A treadmill belt can shift to the right or left over time. If it shifts enough, this may cause the belt to stop moving. Stand at the back end of your machine and inspect the belt. If it has shifted, you will need to center it by turning the rear roller adjustment bolts. These bolts adjust both the tension and the centering of the belt. Follow the instructions in your owner's manual that explain which of the two bolts you need to tighten or loosen to shift the belt back to the center.
If the belt is too tight, it could cause enough tension that the motor can't turn the belt. This is most likely the cause of your belt not moving if you recently adjusted the belt tension due to slippage. Lift the edge of the belt. If you can't raise it at least 2 to 3 inches off the walking deck, the belt is too tight. Follow the directions in your owner's manual for loosening the belt. You will need an Allen wrench to loosen the rear roller adjustment bolts.
If the troubleshooting does not get the belt running again, you may have a tight motor belt or a bad motor. You will need to remove the motor hood to access these parts of your machine. If your treadmill is still under warranty, contact the manufacturer for a professional repair. You may void the warranty if you attempt to work on the motor yourself.
or read up some more at this link.
How to Fix Treadmill Belt That Won Move
or this one.
Acd3 treadmill belt wont move Google Search

Dec 16, 2017 | Exercise & Fitness

1 Answer

My Nordictrack X9i treadmill console says it is operating at speed, however the track is not moving. Occasionally the belt will move for just a moment then it stops.
do you hear the motor running but the belt is not? if it is the belt need tightened or the drive belt may have broken. remove the motor hood to inspect

Aug 23, 2012 | NordicTrack Exercise & Fitness

1 Answer

Proform 470 treadmill, belt won't run
see the video attached:
1) LUBE THE DECK BELT
2) LUBE THE ROLLERS BEARING
3) if this NOT has solution , you must test the a) motor y/o main motor board see the block diagram
God bless you
8_1_2012_1_15_29_pm.gif

Jul 31, 2012 | Exercise & Fitness

1 Answer

Incline and decline wont move, so the belt wont move either. Have a jazfit treadmill
1)LUBE THE DECK BELT, INMEDIATELY.
2) tES THE MOTOR INPUT VOLTAGE, IF THER ARE THE MOTOR NEED REPAIR.
3) tEST THE OUTPUT VOLTAGE BOARD, FOR INPUT VOLTAGE MOTOR, IF THERE ARE NOT THE BOARD IS FAULTY.

4) tRY TO RUN THE SOFTWARE CALIBRITATION.

SINCERELY.GOD BLESS YOU

May 08, 2012 | Exercise & Fitness

1 Answer

My treadmill belt doesn't move at all
Contact the seller for help or send it back if it's only a month old, it must be under warranty.

Jan 25, 2012 | FreeMotion Exercise & Fitness

1 Answer

My T81 treadmill quit working. All of the lights and bells and whistles all work but the belt doesnt move and the incline doesnt move. Ive only had it for about 2 years. It was working fine before I moved...
you need to check voltage going to the motors. no power ,the contoller board is not working. check the connections on the boardmake sure they are in all the way,also the power connections

Mar 17, 2011 | Horizon T91 Treadmill

4 Answers

Treadmill Incline Works, belt does not move
Check the drive belt. It may be loose or broken. If the belt is loose, then to tighten the drive belt, start by removing the front cover. loosen the bolts around the motor then tighten the drive belt by tightening the motor adjuster bolt. Once the drive belt is tight, tighten the motor back down.

Mar 23, 2009 | Nordic Track NordicTrack A2350 Pro...

1 Answer

Manual Treadmills vs. Motorized Treadmills
Treadmills come in two basic varieties, just like lawnmowers: manual and motorized. But, unlike a lawnmower, you will generally get a better workout from a motorized treadmill. Manual Treadmills - Getting Going On a manual treadmill, the action of your feet against the deck moves the belt. Pros * You provide all of the motive power and exercise your lower body. Cons * It can be difficult to get the belt moving intially. That straining against the belt can stress your joints. * You may have to raise the incline of the treadmill significantly to make it easy enough to get the belt moving. * Once the belt is moving, however, you would have to stop and get off to change the incline, so you are stuck with one incline level during each workout. Motorized Treadmill Advantages * The belt is moved by the motor, you don't have to strain to start it. * On many treadmills, you can adjust the speed and incline while you are still walking or running. On others, you may have to get off and adjust the incline manually, but you just have to turn on the treadmill to start the belt again. Manual Treadmills - Speed With a manual treadmill, you go only as fast as you push yourself. If you slow, it slows. If you stop, it stops. Motorized Treadmill Speed and Workouts The speed is adjustable and many motorized treadmills have workout programs that adjust the speed to give you a varied workout. This pushes you to go faster. The constantly moving belt of a motorized treadmill motivates you to keep up. Costs Manual treadmills are relatively inexpensive, in the $100-200 US range. Motorized treadmills for home use cost from $750-$5000, and generally the more you pay, the better you get. Most motorized treadmills under $1000 have underpowered motors and are less sturdy and have fewer options for adjusting the incline, programmed workouts, etc.

Dec 01, 2008 | Endurance TF3i Folding Treadmill

Not finding what you are looking for?

View Most Popular

1400 Treadmill

  • Exercise & Fitness

Related Question

My trimline 2200 treadmill will not start the belt. I started having problems where it only worked on very slow speed now the belt won't turn at all. I tried pushing the circuit breaker reset

  • Exercise & Fitness

Open Questions:

0 Answers

it shows ERR4 on a new balance 1400 treadmill. How do I fix this

Apr 25, 2015 | New Balance 1400 Treadmill

0 Answers

need a circuit board for new balance 1400 treadmill

Apr 18, 2014 | New Balance 1400 Treadmill

0 Answers

sears freespirit 30516 motor would stop at random. Now it doesn't want to go at all. Display console is lit all the time so it shouldn't be a 120 volt power issue. Incline works, heart monitor works. No loose wires detected. fuse on board is good.

Mar 30, 2014 | New Balance 1400 Treadmill

0 Answers

will not read heart rate. Sometimes stops the whole machine

Mar 27, 2014 | New Balance 1400 Treadmill

See all New Balance 1400 Treadmill Questions

Related Topics

New Balance 1400 Treadmill Logo

937 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

1 Answer
My new balance 1500 treadmill

New Balance Balance 1500...

1 Answer
Which AC adapter do I use with my New Balance 9.0e Elliptical machine?

New Balance Exercise & Fitness

1 Answer
Lost my manual and need to program my "New Balance...

New Balance Via Step Komen...

1 Answer
Horizon CT-81 treadmill needs lube

New Balance 1400 Treadmill

1 Answer
I havea new balance 1400 I keep getting two error

New Balance 1400 Treadmill

Top Wearable Fitness Bands Report
Top Wearable Fitness Bands Report

View all Fixya Reports

Top New Balance Exercise & Fitness Experts

Vincent G
Vincent G

Level 3 Expert

2361 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18127 Answers

Are you a New Balance Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...