Here is some useful information off of the manufacturer's product information PDF regarding the lamp problems/issues: LED indications: The green and red LED lights on the TV control touchpad (on the lower right corner of the TV screen)indicate the TV?s current status, as follows: ? Green ON = Control touchpad being pressed. ? Red ON = Power ON. ? Green and/or Red blinking 35) Special care for D LPTM (digital light processing) units: ? Lamp?The lamp in this product has a limited service life. The length of service life varies depending on product use or user settings. If you use the lamp beyond its service life: - you may notice a reduction in the colors and/or brightness of the picture, at which time you should replace the lamp unit; and - the strength of the quar tz glass in the lamp will be reduced and the lamp may rupture. If the lamp ruptures, the TV will not operate until the lamp unit is replaced. Here is more info: LED Indication Condition Solution: 1) Green lights solid; Red blinks at 0.5-second intervals. 2) Green blinks at 0.3-second intervals; Red lights solid. 3) Green and Red blink at 1-second intervals. 4) Green is off; Red blinks. 5) Green and Red blink three times. The lamp unit door is not seated properly.The lamp is not working properly. The lamp is not working properly after the eighth automatic restart (see item#2). For service personnel only. An abnormal temperature increase has occurred. Turn the POWER OFF and unplug the power cord. Review ?How to replace the lamp unit? on pages 57?59 to ensure that the lamp unit door is installed securely. If the problem persists, contact a Toshiba Authorized Service Center. The TV automatically will try to restart itself eight times.Turn the POWER OFF and then ON again. If the problem persists, replace the lamp unit (see pages 57?59). If the problem still persists, contact a Toshiba Authorized Service Center. Turn the POWER OFF: and unplug the power cord. If the problem persists, contact a Toshiba Authorized Service Center. Do not block or cover the slots or openings in the TV cabinet. If the problem persists, contact a Toshiba Authorized Service Center. _______________________________________________ Good luck! I hope this helps you out!
What are the labels on the lights? Timer/Lamp/Service and what color is wich?
2,118 views
Usually answered in minutes!
red and green lights blink continueously and cannot see the picture after replaced a new rear almp
I have a toshiba 62hm14 with the same problem I replace the lamp but the problem is there I found the resistor R3 1K in the module it was damage I replace but I have the same problem turn on turn off turn on tun off
Hey so I have encountered a similar problem the last two times I had to replace the bulb. The red light becomes solid and then the green blinks I think 8-9 times and continues to cycle. I talked to somebody at toshiba (had to talk to several ppl) and finally FOUND A SOLUTION. (though be warned my tv stopped working after a day and I had to repeate it). Okay do the following; instructions to reset the bulb timer 1. remove the bulb 2. place the cover back on 3. plug the tv into the outlet 4. press the power buttom for 30 seconds 5. turn off the tv 6. press the power button again for 30 seconds 7. turn off the tv 8. unplug the tv 9. place the bulb in. 10. place the cover on . 11. plug the tv in 12. turn on tv.
no picture blinking green light, stays blinking but then shuts tv off after few seconds. has perfect sound
×