My Bosch washing machine (logixx 8) shows error code F37 and beeps I have the same problem and was wondering whether it was to do with the cold weather as ours is in the outhouse where there is no heating.

Bosch do not list E61 as an error code.
F16 means the door lock is faulty/misaligned.

The Bosch Logixx 8 washers indicate an F37 error when the temperature sensor is defective. Sometimes this can happen if the incoming water line gets too cold. If that is the case, pressing the temperature button twice may help. (You should see a snowflake in the top left corner of the LCD screen.) Otherwise try thawing the water pipes.

If the problem isn't cold/frozen water lines, then the temperature sensor is faulty, the wiring between the sensor and the control board could be damaged or the control board has a problem getting the temperature information. Check the sensor and the wiring first. Often there is a sheet inside the washer (near the control board) with the expected resistance across the sensor and other parts. Unplug the washer before testing.

Please add a comment with the model of the washer for a parts diagram or price list. If your washer is under warranty, contact Bosch about the error.

I hope this helps.

Cindy Wells

The E57 error code on the Bosch Logixx 8 means that there has been a door lock fault.

I have replaced the carbon brushes (20-30 EUR) in my WAS32791 washmachine after error code F43. Machine is OK. To remove code F43 - look at https://www.youtube.com/watch?v=PcFQQWNvBhg. Instead SPIN button in video press left MENU button.

it fixed itself by the weather warming up.

I forbindelse med start af vaskeprogram melder maskinenen F37 fejl? hvad betyder det?

Yes.
Child lock active.
Hold start button 10 seconds.
Then it will deactivate.

If this is not the case, door lock fault or main board fault.

F37 is because of operating the unit below specified temperatures.

Pressing the temperature button twice shows a snowflake and sets a defrost function.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!

F37 is because of operating the unit below specified temperatures.

Pressing the temperature button twice shows a snowflake and sets a defrost function.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

My Bosch washing machine shows error code F57 and beeps