Model #110, Serial #CE192441: It got off-balanced during the rinse cycle (wet towels, of course), danced around & made a bunch of noise, then stopped. As is standard, I opened the machine, rearranged the wet load, closed the lid & pulled the knob to the on position. This is typically all it takes & the machine will continue through the spin cycle. Not so much. The machine is now full of water, with the same load in it, & refuses to go into the spin cycle & drain. HELP! The other cycles work fine, so it isn't a tripped switch. I'm looking for a DIAGRAM that can walk me through how to fix it. I don't even know how to take the machine apart!
1,558 views
Usually answered in minutes!
I have the save problem. The washer will not drain or spin. The agitate does work.
I have the exact same washer. Mine goes through all the cycles but despite the fact that it spins and drains, the clothes are left soaking wet. I have to wring them out before putting them in the dryer. It is so frustrating~
I turn the cycle selector knob to any position and pull it to start the machine to load water and the machine will not start
×